HCL模拟器IPv6

HCL模拟器，两台路由都通过G0/0连接，配置接口g0/0自动生成链路本地地址，路由器之间无法ping同，

display ipv6 neighbors all 看不到路由邻居信息

[RTA]dis ipv6 neighbors all
Type: S-Static    D-Dynamic    O-Openflow     R-Rule    I-Invalid
IPv6 address              Link layer     VID  Interface/Link ID   State T  Age
[RTA]
[RTA]
[RTA]
[RTA]
[RTA]
[RTA]
[RTA]
[RTA]
[RTA]
[RTA]dis ipv6 g
[RTA]dis ipv6 interface g
[RTA]dis ipv6 interface GigabitEthernet 0/p0 brief
                                        ^
 % Wrong parameter found at '^' position.
[RTA]dis ipv6 interface GigabitEthernet 0/0 brief
*down: administratively down
(s): spoofing
Interface                                 Physical Protocol IPv6 Address
GigabitEthernet0/0                        up       up       3001::1
[RTA]dis ipv6 neighbors all
Type: S-Static    D-Dynamic    O-Openflow     R-Rule    I-Invalid
IPv6 address              Link layer     VID  Interface/Link ID   State T  Age
[RTA]dis g
[RTA]dis gdoi
[RTA]dis gdoi
[RTA]dis gdoi
[RTA]dis interface g
[RTA]dis interface GigabitEthernet 0/0 brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface            Link Protocol Primary IP      Description
GE0/0                UP   UP       --
[RTA]