MSR50-60

两台MSR50-60之间配置trunk连接，vlan的ip地址无法ping同

已经用三层配置试过，链路是正常的（用三层配置可以正常通讯）

MSR5060-Ten3/0/7----MSR50-60 Ten3/0/7

第一台相关配置

VLAN 255

interface Vlan-interface255
 ip address 192.168.255.18 255.255.255.224
 

interface Ten-GigabitEthernet3/0/7
 port link-mode bridge
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 255

第二台相关配置

VLAN 255

interface Vlan-interface255
 ip address 192.168.255.19 255.255.255.224
 

interface Ten-GigabitEthernet3/0/7
 port link-mode bridge
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 255

硬件配置相同

lot 1: RT-MPU-100-X1 uptime is 0 weeks, 0 days, 1 hour, 7 minutes
Last reboot reason : Power overload
CPU ID: 0xb
2G bytes DDR3 SDRAM Memory
8M bytes Flash Memory
PCB               Version:  2.0
CPLD              Version:  1.0
Basic    BootWare Version:  2.30
Extended BootWare Version:  2.30
[SUBSLOT  0]CON                    (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]MGE0                   (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0

Slot 3: RT-SPE-S3 uptime is 0 weeks, 0 days, 1 hour, 5 minutes
Last reboot reason : Power on
CPU ID: 0x13
8G bytes DDR4 SDRAM Memory
8M bytes Flash Memory
PCB               Version:  2.0
CPLD              Version:  1.0
Basic    BootWare Version:  1.01
Extended BootWare Version:  1.01
[SUBSLOT  0]XGE3/0/0               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]XGE3/0/1               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]XGE3/0/2               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]XGE3/0/3               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]XGE3/0/4               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]XGE3/0/5               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]XGE3/0/6               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0
[SUBSLOT  0]XGE3/0/7               (Hardware)2.0,   (Driver)1.0,   (CPLD)1.0