s7606,版本r7557p02,在出方向上配置qos,策略不生效,请问是什么原因导致?
#
traffic behavior V6-Output-permit1
filter permit
#
traffic classifier V6-Output-permit1 operator and
if-match acl ipv6 name V6-Output-permit1
#
qos policy Cache-Output
classifier V6-Output-permit1 behavior V6-Output-permit1
#
acl ipv6 advanced name V6-Output-permit1 rule 0 permit ospf
rule 5 permit ipv6 source FE10::/10
rule 10 permit ipv6 source 2409:201E:2000::/40
rule 15 permit icmpv6 source 2419:803E:2000::/40
rule 20 permit udp source 2419:801E::/31 destination-port eq dns
rule 25 permit udp source 2519:811E::/31 destination-port eq dns
rule 30 permit udp source 2519:821E::/31 destination-port eq dns
rule 35 permit udp source 2519:831E::/31 destination-port eq dns
...
rule 205 permit tcp source 2519:8087:1F00::/40 destination-port eq dns
rule 210 permit udp source-port eq dns destination-port gt 1023
rule 215 permit tcp source-port eq dns destination-port gt 1023
#
interface Ten-GigabitEthernet0/0/1
port link-mode route packet-filter name Cache-Input inbound
qos apply policy Cache-Output outbound
#
(0)
最佳答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
如果我在acl 里加一条rule deny ipv6,然后动作permit动作就是生效的哈?