msr800-10-w无法上网

version 5.20, Release 2516P19 

# sysname H3C 

# configure-user count 5

# ftp server enable 

# domain default enable system 

# telnet server enable

# dar p2p signature-file flash:/p2p_default.mtd 

# port-security enable 

# password-recovery enable 

# vlan 1

 # domain system access-limit disable state active idle-cut disable self-service-url disable 

# dhcp server ip-pool vlan1 extended network ip range 192.168.20.1 192.168.20.254 network mask 255.255.255.0 gateway-list 192.168.20.1 dns-list 192.168.20.1 

# user-group system group-attribute allow-guest

 # local-user admin password cipher $c$3$ZBW+fYqAQZb6jiMPSvdHgNg6B7mfAmE1 authorization-attribute level 3 access-limit 3 service-type telnet service-type web # wlan rrm dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 

# cwmp undo cwmp enable # interface Cellular0/0 async mode protocol link-protocol ppp

 # interface NULL0 

# interface Vlan-interface1 ip address 192.168.20.1 255.255.255.0 dhcp server apply ip-pool vlan1 

# interface GigabitEthernet0/0 port link-mode route ip address dhcp-alloc

 # interface GigabitEthernet0/1 port link-mode route

 # interface GigabitEthernet0/2 port link-mode bridge 

# interface GigabitEthernet0/3 port link-mode bridge

 # interface GigabitEthernet0/4 port link-mode bridge

 # interface GigabitEthernet0/5 port link-mode bridge

 # interface GigabitEthernet0/6 port link-mode bridge 

# interface GigabitEthernet0/7 port link-mode bridge 

# interface GigabitEthernet0/8 port link-mode bridge 

# interface GigabitEthernet0/9 port link-mode bridge 

# interface WLAN-Radio1/0 

# dhcp enable

 # ssh server enable sftp server enable 

# ip https enable 

# nms primary monitor-interface GigabitEthernet0/0 

# load xml-configuration 

# load tr069-configuration 

# user-interface con 0 user-interface tty 13 user-interface vty 0 4 authentication-mode scheme 

# return

配置信息  不知道哪个环节出问题了