s5500 如何开启snmp

参考下这个 ，这个是CMW V7的配置，V5的区别不大

SNMP V3:

1.配置视图,可以使用默认视图ViewDefault(OID:1.3.6.1)

2.配置组

3.配置用户

不使用加密和认证,发送V3 trap.

snmp-agent

snmp-agent sys-info version v3

snmp-agent group v3 mygroup read-view ViewDefault write-view ViewDefault notify-view ViewDefault

snmp-agent usm-user v3 myuser mygroup

snmp-agent trap enable

snmp-agent target-host trap address udp-domain 10.153.42.60 udp-port 162 params securityname myuser v3

使用认证但不加密,发送V3 trap.

snmp-agent

snmp-agent sys-info version v3

snmp-agent group v3 mygroup authentication read-view ViewDefault write-view ViewDefault notify-view ViewDefault

snmp-agent usm-user v3 myuser mygroup authentication-mode sha aaaaaa

snmp-agent trap enable

snmp-agent target-host trap address udp-domain 10.153.42.60 udp-port 162 params securityname myuser v3 authentication

使用认证和加密,发送V3 trap.

snmp-agent

snmp-agent sys-info version v3

snmp-agent group v3 mygroup privacy read-view ViewDefault write-view ViewDefault notify-view ViewDefault

snmp-agent usm-user v3 myuser mygroup authentication-mode sha aaaaaa privacy-mode des56 bbbbbb

snmp-agent trap enable

snmp-agent target-host trap address udp-domain 10.153.42.60 udp-port 162 params securityname myuser v3 privacy

不使用加密和认证,发送V1或V2c trap.(Quidview不支持V3 trap)

snmp-agent

snmp-agent community read myuser或新启个名字如:newuser

snmp-agent sys-info version all

snmp-agent group v3 mygroup read-view ViewDefault write-view ViewDefault notify-view ViewDefault

snmp-agent usm-user v3 myuser mygroup

snmp-agent trap enable

snmp-agent target-host trap address udp-domain 10.153.42.60 udp-port 162 params securityname myuser或新启个名字如:newuser v1或v2c

//这里的snmp的用户名可以和trap用户名不一样.