WA2620i-AGN+瘦AP误删bin文件后不断的重启,想使用电脑做FTP服务器灌入Fat.bin,但设备启动后按Ctrl+B进入不了Bootware,到下一页面,按Ctrl+D也不起反应.用电脑做FTP服务器,把电脑OP设为192.168.0.100, 用网线连接对连设备,也没出现Protocol (FTP or TFTP) : ftp,不知道要怎么刷进bin文件啊,手里条件只有电脑了/
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/wa2600a_fit.bin!
The main application file does not exist--flash:/wa2600a_fit.bin!
Starting to get the backup application file--flash:/backup.bin!
The backup application file does not exist--flash:/backup.bin!
Starting to get the secure application file--flash:/secure.bin!
The secure application file does not exist--flash:/secure.bin!
Booting App fails!
Trying to get the IP address from the DHCP server......
Getting IP Address Failed, the system will reboot.
[State : Idle] Reset re
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing..........................Done!
(0)
最佳答案
先下载个tftp软件并运行,配置好ip地址,连接ap网口,然后
软件下载地址:http://www.h3c.com/cn/d_201511/896971_30005_40.htm
账号:yx800 密码:01230123
升级过程:
重启ap,当出现“Press Ctrl+B to enter extend boot menu...”时,键入<Ctrl+B>,系统提示:
BootWare password: Not required. Please press Enter to continue.
按下<Enter>键后,系统进入BootWare主菜单:
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9):
在BootWare主菜单下键入<3>,进入以太网子菜单,系统显示如下:
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!>
此界面再次选择 <3> Modify Ethernet Parameter
在通过以太网口升级应用程序前,需要对AP的以太网口进行配置,请按如下进行配置:
在BootWare主菜单中键入<3>,进入以太网子菜单,然后键入<5>进入以太网口配置菜单:
============================<ETHERNET PARAMETER SET>======================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
==========================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wa2600a_fat.bin
Target File Name :wa2600a_fat.bin
Server IP Address :192.168.0.1
Local IP Address :192.168.0.50 (将连接的电脑地址设置成192.168.0.50,并启动tftp软件,将下载的版本文件该名成wa2600a_fat.bin,并放在tftp的根目录下)
Gateway IP Address :
FTP User Name :
FTP User Password :
以上配置均完成后,在BootWare主菜单下键入<2> Update Main Application File ,系统开始升级主应用程序:
升级完成后键入<0>,返回BootWare主菜单,然后键入<1>,启动系统
(0)
现在就是用超级终端按Ctrl+B进入不了extended boot menu页面 ,这个怎么弄?
bootrom损坏或丢失,也可能是硬件问题,重新上传bootrom吧,如果失败,联系厂家返厂检查吧
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
现在就是用超级终端按Ctrl+B进入不了extended boot menu页面