产品代码:EWP-WA4320-FIT 怎么刷成胖模式?
请提供详细教程,能一步步往下走的,小白也可操作的,谢谢。
(0)
最佳答案
现在个tftp软件并运行,现在ap的fat版本软件,然后升级
软件下载地址:http://www.h3c.com/cn/d_201805/1083983_30005_40.htm
账号:yx800 密码:01230123
升级过程:
重启ap,当出现“Press Ctrl+B to enter extend boot menu...”时,键入<Ctrl+B>,系统提示:
BootWare password: Not required. Please press Enter to continue.
按下<Enter>键后,系统进入BootWare主菜单:
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9):
在BootWare主菜单下键入<3>,进入以太网子菜单,系统显示如下:
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!>
此界面再次选择 <3> Modify Ethernet Parameter
在通过以太网口升级应用程序前,需要对AP的以太网口进行配置,请按如下进行配置:
在BootWare主菜单中键入<3>,进入以太网子菜单,然后键入<5>进入以太网口配置菜单:
============================<ETHERNET PARAMETER SET>======================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
==========================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wa4300s_fat.bin
Target File Name :wa4300s_fat.bin
Server IP Address :192.168.0.1
Local IP Address :192.168.0.50 (将连接的电脑地址设置成192.168.0.50,并启动tftp软件,将下载的版本文件该名成 wa4300s_fat.bin ,并放在tftp的根目录下)
Gateway IP Address :
FTP User Name :
FTP User Password :
以上配置均完成后,在BootWare主菜单下键入<2> Update Main Application File ,系统开始升级主应用程序:
升级完成后键入<0>,返回BootWare主菜单,然后键入<1>,启动系统
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
tftp软件是通过console线连接AP跟电脑吗?
用console口连接配置,用网线把终端和ap连接起来