无线AP WA2620-AGN

我按照思路配置了设备  为什么信号是正常的但是dhcp拿不到地址  是为什么

配置如下

<WA2620-AGN>DIS current-configuration 

 # version 5.20, 0000 # sysname WA2620-AGN

 # domain default enable system 

# telnet server enable # port-security enable 

# password-recovery enable 

# vlan 1 

# vlan 2 

# domain system access-limit disable state active idle-cut disable self-service-url disable 

# dhcp server ip-pool 1

network 192.168.100.0 mask 255.255.255.0 

 gateway-list 192.168.100.254 

 dns-list 114.114.114.114 

# user-group system group-attribute allow-guest

# local-user admin password cipher $c$3$6tSpAMAe2g2eYEx7+4oOmeYQlR2bO6u1cJH9qY0=

 authorization-attribute level 3 

 service-type telnet 

# wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54

 # wlan service-template 1 clear

 ssid H3C service-template enable 

# wlan service-template 2 clear 

 ssid h3c-1 service-template enable 

# cwmp undo cwmp enable

 # interface NULL0 

# interface Vlan-interface1

 ip address 192.168.0.50 255.255.255.0

 # interface Vlan-interface2 

 ip address 192.168.100.254 255.255.255.0

 # interface GigabitEthernet1/0/1 

 port link-type trunk 

 port trunk permit vlan all

 # interface WLAN-BSS2

 port access vlan 2 

# interface WLAN-BSS32

 port link-type hybrid 

 port hybrid vlan 1 untagged 

# interface WLAN-BSS33

 port link-type hybrid 

 port hybrid vlan 1 untagged 

# interface WLAN-Radio1/0/1 

 radio-type dot11a

 service-template 2 

interface wlan-bss 2 

interface WLAN-Radio1/0/2

 service-template 1 interface wlan-bss 33 

# dhcp enable 

# arp-snooping enable #

 load xml-configuration #

 load tr069-configuration # 

 user-interface con 0 

user-interface vty 0 4 

 authentication-mode scheme

 # return

现状态 无线信号正常  但是获取不到地址  还是2620无法支持自动分配地址  官网手册也没有提到这个