<S10508-1>dis version H3C Comware Software, Version 7.1.045, Release 7169P01 Copyright (c) 2004-2015 Hangzhou H3C Tech. Co., Ltd. All rights reserved. H3C S10508 uptime is 164 weeks, 1 day, 20 hours, 49 minutess
使用 display int vlan xx命令查看输出结果。接口下的 input output 的数据包没有统计。
<S10508-1>dis int brie Brief information on interfaces in route mode: Link: ADM - administratively down; Stby - standby Protocol: (s) - spoofing Interface Link Protocol Primary IP Description InLoop0 UP UP(s) -- M-GE1/0/0/0 DOWN DOWN -- NULL0 UP UP(s) -- REG0 UP -- -- Vlan3 UP UP 172.31.0.254 GuanLi_Vlan Vlan10 UP UP 172.31.10.254 Vlan76 UP UP 192.168.76.254 TuZhuWuLiu_Server Vlan77 UP UP 192.168.77.254 Vlan78 UP UP 192.168.78.254 Vlan81 UP UP 172.22.189.1 Vlan82 UP UP 172.22.190.254 Vlan84 UP UP 172.22.192.254 Brief information on interfaces in bridge mode: Link: ADM - administratively down; Stby - standby Speed: (a) - auto Duplex: (a)/A - auto; H - half; F - full Type: A - access; T - trunk; H - hybrid Interface Link Speed Duplex Type PVID Description <S10508-1>dis int vlan 3 Vlan-interface3 Current state: UP Line protocol state: UP Description: GuanLi_Vlan Bandwidth: 10000000 kbps Maximum transmission unit: 1500 Internet address: 172.31.0.254/24 (primary) IP packet frame type: Ethernet II, hardware address: 50da-003f-5501 IPv6 packet frame type: Ethernet II, hardware address: 50da-003f-5501 Last clearing of counters: Never Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Input: 0 packets, 0 bytes, 0 drops Output: 0 packets, 0 bytes, 0 drops <S10508-1>dis int vlan 10 Vlan-interface10 Current state: UP Line protocol state: UP Description: Vlan-interface10 Interface Bandwidth: 10000000 kbps Maximum transmission unit: 1500 Internet address: 172.31.10.254/24 (primary) IP packet frame type: Ethernet II, hardware address: 50da-003f-5501 IPv6 packet frame type: Ethernet II, hardware address: 50da-003f-5501 Last clearing of counters: Never Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Input: 0 packets, 0 bytes, 0 drops Output: 0 packets, 0 bytes, 0 drops
(0)
input output cpu发包的会统计,过路报文不会统计
(0)
两台直连交换机配置流统,也看不到流量是怎么回事
两台直连交换机配置流统,也看不到流量是怎么回事
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明