H3C WA4330-ACN 新创建的SSID 无法被搜索到

H3C WA4330-ACN恢复出厂后，采用胖模式，在WEB接口192.168.0.50界面，新创建的SSID 无法被搜索到，但默认SSID:H3C却能被电脑搜索到（2台H3C WA4330-ACN，所以排除硬件问题）都是这种情况，请问是哪里的设置问题？ 以下是配置内容<WA4330-ACN>dis cu # version 5.20, Release 1508P11 # sysname WA4330-ACN # domain default enable system # telnet server enable # port-security enable # password-recovery enable # undo attack-defense tcp fragment enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$FNcyEfsEJT1By5ggAW/2H234sptZXFABC1rVEpg= authorization-attribute level 3 service-type telnet service-type web # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 clear ssid H3C service-template enable # wlan service-template 2 crypto ssid nabel-test ip verify source cipher-suite tkip security-ie rsn security-ie wpa # wlan service-template 3 clear ssid nabel-test2 service-template enable # cwmp undo cwmp enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.50 255.255.255.0 # interface GigabitEthernet1/0/1 # interface GigabitEthernet1/0/2 # interface WLAN-BSS32 port link-type hybrid port hybrid vlan 1 untagged # interface WLAN-BSS33 port link-type hybrid port hybrid vlan 1 untagged # interface WLAN-BSS35 port link-type hybrid port hybrid vlan 1 untagged port-security max-mac-count 4 port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase cipher $c$3$QbImEzMx4ODCuyVq/D/8tGrkqHtZ6/zndLHbWAg= # interface WLAN-BSS38 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode mac-authentication mac-authentication domain system # interface WLAN-Radio1/0/1 # interface WLAN-Radio1/0/2 service-template 1 interface wlan-bss 33 # interface WLAN-Radio1/0/3 # arp-snooping enable # load xml-configuration # load tr069-configuration # user-interface con 0 user-interface vty 0 4 authentication-mode scheme #