H3C-EWP-WA4320i-ACN怎么切换成胖模式?如何确定现在是胖模式还是瘦模式?已经恢复出厂设置?并且怎么能有WEB界面?
(0)
最佳答案
用 dis verion 命令看看当前版本,带fat是胖版本,带fit是瘦版本,瘦版本切胖版本,需要下载胖版本软件,上传至设备,胖版本默认支持web管理,默认登录地址是:http://192.168.0.50
用户名:admin 密码:h3capadmin
升级文档和软件下载地址(升级前先下载并运行tftp软件):
http://www.h3c.com/cn/d_201808/1104198_30005_40.htm
用户名:yx800 密码:01230123
升级过程:
重启ap,当出现“Press Ctrl+B to enter extend boot menu...”时,键入<Ctrl+B>,系统提示:
BootWare password: Not required. Please press Enter to continue.
按下<Enter>键后,系统进入BootWare主菜单:
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9):
在BootWare主菜单下键入<3>,进入以太网子菜单,系统显示如下:
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!>
此界面再次选择 <3> Modify Ethernet Parameter
在通过以太网口升级应用程序前,需要对AP的以太网口进行配置,请按如下进行配置:
在BootWare主菜单中键入<3>,进入以太网子菜单,然后键入<5>进入以太网口配置菜单:
============================<ETHERNET PARAMETER SET>======================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
==========================================================================
Protocol (FTP or TFTP) :tftp
Load File Name : wa4300_fat.bin (需把下载的版本文件改成这个名字再上传)
Target File Name : wa4300_fat.bin
Server IP Address :192.168.0.1
Local IP Address :192.168.0.50 (将连接的电脑地址设置成192.168.0.50,并启动tftp软件,将下载的版本文件该名成 wa4300_fat.bin ,并放在tftp的根目录下)
Gateway IP Address :
FTP User Name :
FTP User Password :
以上配置均完成后,在BootWare主菜单下键入<2> Update Main Application File ,系统开始升级主应用程序:
升级完成后键入<0>,返回BootWare主菜单,然后键入<1>,启动系统
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
加载不上呀,上传上去以后刷不上去
ap格式化后进入bootroom重新上传下,仔细参考下案例配置是没有问题的。
上传以后就起不来了,是我的版本的问题嘛?
http://www.h3c.com/cn/Service/Document_Software/Software_Download/IP_Wlan/AP/H3C_WA4300/ 重新下载下软件
修改名字为wa4300-fat
好的,我再试一下,您能帮忙远程一下嘛?
备注:注意给电脑手动配置一个与AP同网段的IP地址,保证电脑与AP路由可达 =============<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> ============================================================= Enter your choice(0-5): 2 //此时可以看到TFTP服务器上数据上传的滚动 Loading..................................................................... ....................................Done! v7的ap这一步先选择1,上传版本吧bootroom降到v5后,再格式化下从头来一遍,到这一步再选择2.
这个版本是不不支持web界面呀?
设置文件属性失败总是