型号WA4320i-ACN重置命令不起作用阿？

我试试看

但是执行完后，登录192.168.0.50，还是提示认证失败，admin，密码h3capadmin

用IE浏览器登录下，清空缓存，重启IE浏览器

好的，我试试

还是不行，提示认证失败

看下交换机的配置吧

我这个是AP，型号WA4320i-ACN的AP。

H3C WA4320i-ACN BootWare, Version 1.09 * * * **************************************************************************** Copyright (c) 2004-2015 Hangzhou H3C Technologies Co., Ltd. Compiled Date : Mar 23 2015 CPU Type : ATHEROS AR9550 CPU L1 Cache : 32KB CPU Clock Speed : 720MHz Memory Type : SDRAM Memory Size : 256MB Memory Speed : 560MHz BootWare Size : 512KB Flash Size : 32MB CPLD Version : 006 PCB Version : Ver.C

。。。。凉了，能换个电脑吗？

OK，我换个电脑

如果还不行，把AP的配置贴一份。dis cu

<WA4320i-ACN>dis cu # version 5.20, Release 1507P04 # sysname WA4320i-ACN # clock timezone Beijing add 08:00:00 # super password level 3 cipher $c$3$OqqJHhsGljLVC036599u6hkwTTDQ6h3juA== # # domain default enable system # telnet server enable # port-security enable # password-recovery enable # undo attack-defense tcp fragment enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$PYhnRQUZNViYcgjhbJqWjwMgqoDwM45m8Q== authorization-attribute level 3 service-type telnet service-type web # wlan rrm dot11a mandatory-rate 6 12 24 dot11a supported-rate 9 18 36 48 54 dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # wlan service-template 1 clear ssid H3C # wlan service-template 2 crypto description gongwang ssid 1604aaa cipher-suite ccmp security-ie rsn service-template enable # cwmp undo cwmp enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.0.50 255.255.255.0 # interface GigabitEthernet1/0/1 # interface GigabitEthernet1/0/2 # interface WLAN-BSS32 port link-type hybrid port hybrid vlan 1 untagged # interface WLAN-BSS33 port link-type hybrid port hybrid vlan 1 untagged # interface WLAN-BSS34 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase cipher $c$3$d6eevVdcIoiOEvxbzeK8taYdnRXHiDQZqwzf # interface WLAN-BSS35 port link-type hybrid port hybrid vlan 1 untagged port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase cipher $c$3$d6eevVdcIoiOEvxbzeK8taYdnRXHiDQZqwzf # interface WLAN-Radio1/0/1 service-template 2 interface wlan-bss 34 # interface WLAN-Radio1/0/2 service-template 1 interface wlan-bss 33 service-template 2 interface wlan-bss 35 # arp-snooping enable # load xml-configuration # load tr069-configuration # user-interface con 0 user-interface vty 0 4 authentication-mode scheme # return <WA4320i-ACN>

这样你看不清阿。。

命令行输入 sys ip http enable 再登录试试

sys ip http enable

先sys 再ip http enable

好的

<WA4320i-ACN>sys ip http enable ^ % Too many parameters found at '^' position

输入命令回车提示 % Too many parameters found at '^' position.

sys，回车 ip http enable

ok

<WA4320i-ACN>sys System View: return to User View with Ctrl+Z. [WA4320i-ACN]ip http enable Info: HTTP server has been started!

还是认证失败

额。、。。。这属实不会了

谢谢你了。我再问问吧。感谢