F1000-C8150用tftp在boot菜单里传不上去，好像是空间不够，有哪个大老告诉我方法，我在菜单里ctra 了怎么空间还不足呢

以下为bootware的操作指导，关键注意项为操作时必须选择更新完整bootware。

通过BootWare菜单升级BootWare文件

1. 通过以太网口利用TFTP/FTP升级BootWare文件

(1)      进入BootWare菜单。

(2)      在BootWare菜单下键入<7>，可以进入BootWare操作菜单，系统显示如下：

=========================<BootWare Operation Menu>==========================

|Note:the operating device is cfa0                                          |

|<1> Backup Full BootWare                                                   |

|<2> Restore Full BootWare                                                  |

|<3> Update BootWare By Serial                                              |

|<4> Update BootWare By Ethernet                                            |

|<0> Exit To Main Menu                                                      |

============================================================================

Enter your choice(0-4):                                                       

BootWare操作菜单中各选项解释如下：

表1 BootWare操作菜单

(3)      键入<4>进入BootWare操作以太网口子菜单：

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extend BootWare                                                |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):                                                       

BootWare操作以太网口子菜单中各选项解释如下：

表2 BootWare操作以太网子菜单

(4)      键入<4>进入以太网口配置菜单

==========================<ETHERNET PARAMETER SET>==========================

|Note:       '.' = Clear field.                                             |

|            '-' = Go to previous field.                                    |

|          Ctrl+D = Quit.                                                   |

============================================================================

Protocol (FTP or TFTP) :TFTP                                                

Load File Name           :main.btw       //此文件名为示例

                            :                                                        

Target File Name         :main.btw       //此文件名为示例

                            :                                                        

Server IP Address       :192.168.0.2        //此IP为示例

Local IP Address        :192.168.0.1    //此IP为示例

Gateway IP Address      :0.0.0.0

(5)      升级完整的BootWare，键入<1>：

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                   |

|<2> Update Extend BootWare                                                 |

|<3> Update Basic BootWare                                                  |

|<4> Modify Ethernet Parameter                                              |

|<0> Exit To Main Menu                                                      |

============================================================================

Enter your choice(0-4): 1                                                      

Loading............Done!                                                       

485756 bytes downloaded!                                                       

Updating Basic BootWare? [Y/N]Y                                                

Updating Basic BootWare...........Done!                                        

Updating Extend BootWare? [Y/N]Y                                                

Updating Extend BootWare...........Done!                                       

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================   

|<1> Update Full BootWare                                                   |   

|<2> Update Extend BootWare                                                 |   

|<3> Update Basic BootWare                                                  |   

|<4> Modify Ethernet Parameter                                              |   

|<0> Exit To Main Menu                                                      |   

============================================================================   

Enter your choice(0-4):

(6)      升级成功后，返回到BootWare主菜单。再选择<0>，重新启动系统。