您好,请知:
1.可通过如下命令修改接口模式:
int gi 0/0
port link-mode route
2.如果您想做聚合,可参考如下配置:
可以通过三层链路聚合的方式实现多个端口共用一个IP地址,具体操作如下:
2.1、创建三层聚合组,并配置IP地址:
[H3C]interface Route-Aggregation 1
[H3C-Route-Aggregation1]ip address 10.0.0.1 24
[H3C-Route-Aggregation1]undo shutdown
[H3C-Route-Aggregation1]quit
2.2、将三层链路聚合组应用到具体的物理端口:
[H3C]interface range GigabitEthernet 1/0/1 to GigabitEthernet 1/0/2
[H3C-if-range]port link-mode route
[H3C-if-range]port link-aggregation group 1
暂无评论