v5的AC+ap做本地转发，远程集中认证，下发的map文件一般怎么配置？

本地转发集中portal认证的map文件配置：

1. apcfg.txt配置文件

编辑AP的配置文件apcfg.txt。

system-view

portal server pt ip 8.1.1.50 key simple 123456 url http://8.1.1.50:8080/portal//配置portal服务器地址为8.1.1.5，并指定服务器对应的url

portal free-rule 1 source interface GigabitEthernet 1/0/1 destination any//配置portal免认证规则1，用于放行AP上起portal的接口能够与portal服务器通信

portal device-id beijing-ac-01//配置移动需求的Portal参数

portal url-param include nas-id param-name vlan

portal url-param include user-mac des-encrypt param-name wlanusermac

portal url-param include nas-ip param-name wlanacip

portal url-param include ap-mac param-name wlanapmac

portal url-param include user-url param-name wlanfirsturl

portal url-param include user-ip param-name wlanuserip

portal url-param include ac-name param-name wlanacname

portal url-param include ssid

portal host-check wlan

vlan 30//创建vlan 30

interface vlan 30//创建VLAN30对应接口，并接入接口VLAN30视图

 portal server pt method direct//接口下指定portal服务器并配置为直接认证方式

 portal nas-ip 138.10.1.80//配置接口发送portal报文使用的源地址为AC的地址

interface GigabitEthernet 1/0/1//进入到AP的物理接口GigabitEthernet1/0/1

 port link-type trunk//配置接口GigabitEthernet1/0/1类型为Trunk

 port trunk permit vlan all//配置接口GigabitEthernet1/0/1允许所有VLAN通过