防火墙F100-C 恢复出厂命令后，还是不能进web设置

•  防火墙F100-C 恢复出厂命令后，还是不能进web设置

<H3C>dis cur 

#

 version 5.20, Release 5142 

 sysname H3C 

 undo voice vlan mac-address 00e0-bb00-0000 

 domain default enable system 

 port-security enable 

undo alg dns 

 undo alg rtsp 

 undo alg h323 

 undo alg sip 

 undo alg sqlnet 

 undo alg pptp 

 undo alg ils 

 undo alg nbt 

 undo alg msn 

 undo alg qq 

 undo alg tftp 

 undo alg sccp 

 undo alg gtp 

session synchronization enable 

 password-recovery enable 

vlan 1 

domain system access-limit disable 

 state active idle-cut disable 

 self-service-url disable 

pki domain default crl check disable 

user-group system group-attribute allow-guest 

local-user admin password cipher $c$3$vI1xB0qHn8lMdenF73HxYvQ5eCvB/aKb 

 authorization-attribute level 3 

 service-type telnet 

 service-type web 

cwmp undo cwmp enable 

interface NULL0 

interface GigabitEthernet0/0 

 port link-mode route

 ip address 192.168.0.1 255.255.255.0 

 interface GigabitEthernet0/1 port link-mode route 

interface GigabitEthernet0/2 port link-mode route 

interface GigabitEthernet0/3 port link-mode route 

interface GigabitEthernet0/4 port link-mode route 

vd Root id 1 

 zone name Management id 0

 priority 100 import 

interface GigabitEthernet0/0 

zone name Local id 1 priority 100 

 zone name Trust id 2 priority 85

 zone name DMZ id 3 priority 50

 zone name Untrust id 4 priority 5

 switchto vd Root 

 zone name Management id 0

 ip virtual-reassembly

 zone name Local id 1

 ip virtual-reassembly 

 zone name Trust id 2 

 ip virtual-reassembly 

 zone name DMZ id 3 ip 

virtual-reassembly 

 zone name Untrust id 4 ip virtual-reassembly

 load xml-configuration 

 load tr069-configuration 

 user-interface con 0

 user-interface vty 0 4

 authentication-mode scheme 

 return