您好,请知:
如果想采用三层链路聚合:
1、创建三层聚合组,并配置IP地址:
[H3C]interface Route-Aggregation 1
[H3C-Route-Aggregation1]ip address 10.0.0.1 24
[H3C-Route-Aggregation1]undo shutdown
[H3C-Route-Aggregation1]quit
2、将三层链路聚合组应用到具体的物理端口:
[H3C]interface range GigabitEthernet 1/0/1 to GigabitEthernet 1/0/2
[H3C-if-range]port link-mode route
[H3C-if-range]port link-aggregation group 1
如果是想采用二层链路聚合:
vlan 10
quit
int bridge-aggregation 1
quit
int range gi 1/0/1 to gi 1/0/2
port link-aggregation group 1
quit
int bridge-aggregation 1
port link-type trunk
port trunk permit vlan 10
quit
两台三层交换机互联?互联链路有三条?