交换机日志报错如下:
%Dec 18 02:10:58:198 2019 HFYT_AH02_S7506E_A STM/2/STM_LINK_STATUS_TIMEOUT: -Chassis=2-Slot=0; IRF port 1 is down because heartbeat timed out.
%Dec 18 02:10:58:219 2019 HFYT_AH02_S7506E_A STM/3/STM_LINK_STATUS_DOWN: -Chassis=2-Slot=0; IRF port 1 is down.
%Dec 18 02:10:58:241 2019 HFYT_AH02_S7506E_A STM/2/STM_LINK_STATUS_TIMEOUT: IRF port 2 is down because heartbeat timed out.
%Dec 18 02:10:58:252 2019 HFYT_AH02_S7506E_A STM/3/STM_LINK_STATUS_DOWN: IRF port 2 is down.
%Dec 18 02:10:58:263 2019 HFYT_AH02_S7506E_A STM/6/STM_LINK_STATUS_UP: IRF port 2 is up.
%Dec 18 02:10:59:040 2019 HFYT_AH02_S7506E_A STM/6/STM_LINK_STATUS_UP: -Chassis=2-Slot=0; IRF port 1 is up.
%Dec 18 02:11:14:157 2019 HFYT_AH02_S7506E_A STM/2/STM_LINK_STATUS_TIMEOUT: IRF port 2 is down because heartbeat timed out. %Dec 18 02:11:14:173 2019 HFYT_AH02_S7506E_A STM/3/STM_LINK_STATUS_DOWN: IRF port 2 is down.
%Dec 18 02:11:14:349 2019 HFYT_AH02_S7506E_A STM/2/STM_LINK_STATUS_TIMEOUT: -Chassis=2-Slot=0; IRF port 1 is down because heartbeat timed out.
%Dec 18 02:11:14:375 2019 HFYT_AH02_S7506E_A STM/3/STM_LINK_STATUS_DOWN: -Chassis=2-Slot=0; IRF port 1 is down.
%Dec 18 02:11:14:403 2019 HFYT_AH02_S7506E_A STM/6/STM_LINK_STATUS_UP: -Chassis=2-Slot=0; IRF port 1 is up.
%Dec 18 02:11:15:110 2019 HFYT_AH02_S7506E_A STM/6/STM_LINK_STATUS_UP: IRF port 2 is up.
交换机IRF状态正常,但是如果拔掉其中一条IRF电缆,会出现IRF分裂问题,并且bfd会话一直down的状态
交换机版本信息如下
H3C Comware Platform Software Comware Software, Version 5.20, Release 6708P03 Copyright (c) 2004-2013 Hangzhou H3C Tech. Co., Ltd. All rights reserved. H3C S7506E-S uptime is 0 week, 0 day, 0 hour, 33 minutes
以下是irf配置及bfd配置
irf mac-address persistent always
irf auto-update enable undo
irf link-delay irf member 1 priority 20
irf member 1 description s7506E-main
irf member 2 description s7506E-backup
irf-port 1/1
port group interface Ten-GigabitEthernet1/5/0/1 mode normal
# irf-port 1/2
port group interface Ten-GigabitEthernet1/5/0/2 mode normal
# irf-port 2/1
port group interface Ten-GigabitEthernet2/5/0/2 mode normal
# irf-port 2/2
port group interface Ten-GigabitEthernet2/5/0/1 mode normal
interface Vlan-interface1000
description IRF-BFD-MAD mad bfd enable
mad ip address 192.168.100.1 255.255.255.0 member 1
mad ip address 192.168.100.2 255.255.255.0 member 2
(0)
最佳答案
堆叠如果是2个设备的话,怎么会有4个堆叠口,另外没有看到bfd配置方法,(配置不全),可以参考链接:(1.13.2))http://www.h3c.com/cn/d_201811/1126398_30005_0.htm#_Toc529181943
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
我知道你的意思了,你意思是每个堆叠口 两个成员端口对吧,这样也是没问题的