3par开局相关问题

建议你选择 "N" ,这个在初始化后，即使你选错了，也是可以在以后修改的。对业务没有影响的。

Login to any node as root from SP and issue netcconf --get

Your netconf --get (should look like this (on the InServ): 

root@1414776-0:~# netcconf --get 
IPv4 Address: 15.250.83.28 
Netmask: 255.255.248.0 
IPv6 Address: ::/0 
Nodes: 0 1 2 3 4 5 6 7 
Default route through gateway 15.250.80.1, via 15.250.83.28 
Speed and duplex will be autonegotiated. 
No NTP server. 
"Non-encrypted ports are disabled". 

If it says "Non-encrypted ports are disabled." , then netc rules apply and you won't have port 5781 in the firewall ACCEPT chain or in the intra-inserv firewall forwarding rules. 

4)As we can see above, non-encrypted ports are disabled. Follow steps below to enable the non-encrypted ports.

5)From any node issue netcconf --set 

Answer the questions using the data you saw in the netcconf --get output Except answer "NO" (n) when asked if you want to disable non-encrypted ports. 
Doing that, and your firewall and forwarding rules will be reconfigured and persistent.

6)Now issue a netcconf --get and confirm that the encrypted ports are now enabled.