<H3C>dis cu # version 5.20, Release 2311, Basic # sysname H3C # domain default enable system # dar p2p signature-file cfa0:/p2p_default.mtd # port-security enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$BTuqoJKmCRr2V2KWQ6IgPriRPXWYz9RO authorization-attribute level 3 service-type telnet # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface NULL0 # interface GigabitEthernet0/0 port link-mode route ip address 192.168.1.1 255.255.255.0 # interface GigabitEthernet0/1 port link-mode route # load xml-configuration # user-interface con 0 user-interface tty 13 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # return
<H3C>dis cu # version 5.20, Release 2311, Basic # sysname H3C # domain default enable system # dar p2p signature-file cfa0:/p2p_default.mtd # port-security enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$BTuqoJKmCRr2V2KWQ6IgPriRPXWYz9RO authorization-attribute level 3 service-type telnet # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface NULL0 # interface GigabitEthernet0/0 port link-mode route ip address 192.168.1.1 255.255.255.0 # interface GigabitEthernet0/1 port link-mode route # load xml-configuration # user-interface con 0 user-interface tty 13 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # return
(0)
最佳答案
service-type telnet
在local-user下增加一个service-type web就好了,你是不是升过级?
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论