IRF报错

您好，请知：

您使用的应该是H3C HCL模拟器的S5820做的IRF，可参考如下配置过程：

1、1号设备关键配置如下：

[H3C]irf member 1 renumber 1     //将1号设备设定为成员1

Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]shutdown

[H3C-if-range]quit

[H3C]irf-port 1/1  //将物理端口绑定到IRF端口

[H3C-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/50

[H3C-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/51

[H3C-irf-port1/1]quit

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]undo shutdown

[H3C-if-range]quit

[H3C]irf-port-configuration active  //激活IRF

[H3C]save

2、2号设备关键配置点如下：

[H3C]irf member 1 renumber 2  //将2号设备设定为成员2

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]shutdown

[H3C-if-range]quit

[H3C]irf-port 1/2  //将物理端口绑定到IRF端口

[H3C-irf-port1/2]port group interface Ten-GigabitEthernet 1/0/50

[H3C-irf-port1/2]port group interface Ten-GigabitEthernet 1/0/51

[H3C-irf-port1/2]quit

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]undo shutdown

[H3C-if-range]quit

[H3C]irf-port-configuration active  //激活IRF

[H3C]save