S3600V2-28TP-SI 配置voice vlan 并开启lldp

lldpcli show neighbors details 

 ------------------------------------------------------------------------------- 

LLDP neighbors:

 ------------------------------------------------------------------------------- 

Interface: eth0, via: LLDP, RID: 3, Time: 0 day, 00:00:19

Chassis:  

        ChassisID: mac 0c:d9:96:66:74:00

         SysName: Switch

        SysDescr: Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1) Technical 

                        Support: http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc. Compiled Thu 09-Feb-12 19:22 by prod_rel_team

        MgmtIP: 192.168.1.3

        Capability: Bridge, on

        Capability: Router, off

Port:

        PortID: ifname Gi1/0/1

        PortDescr: GigabitEthernet1/0/1

         TTL: 120

        PMD autoneg: supported: yes, enabled: yes

                Adv: 10Base-T, HD: yes, FD: yes

                Adv: 100Base-TX, HD: yes, FD: yes

                Adv: 1000Base-T, HD: no, FD: yes

                MAU oper type: 100BaseTXFD - 2 pair category 5 UTP, full duplex mode

VLAN: 1, pvid: yes

LLDP-MED:

            Device Type: Network Connectivity Device

            Capability: Capabilities, yes

            Capability: Policy, yes

            Capability: Location, yes

            Capability: Inventory, yes

            LLDP-MED Network Policy for: Voice, Defined: yes

                    VLAN: 658

                    Priority: Voice

                    PCP: 5

                    DSCP Value: 46

            LLDP-MED Network Policy for: Voice Signaling, Defined: no

                    Priority: Best effort

                    PCP: 0

                    DSCP Value: 0

            LLDP-MED Location Identification: Type: Civic address

                    Country:

             Inventory:

                     Hardware Revision: WS-C2960S-48TS-L (PowerPC):G0

                      Software Revision: 12.2(55)SE5

                     Manufacturer: Cisco Systems, Inc.

                    Model: WS-C2960S-48TS-L

-------------------------------------------------------------------------------

现在通过对比windows和ubuntu的数据包，发现windows的第一个lldp是数据请求包，和后面的包是不一样的，但是在lldpd中怎么配置不知道，

求大神指点!!!!