*Jan 3 01:11:44:507 2011 MSR830 IPSEC/7/EVENT: SP is not complete when matching flow. *
Jan 3 01:11:46:707 2011 MSR830 IPSEC/7/EVENT: Could not find tunnel, ike profile name is 1.
*Jan 3 01:11:46:707 2011 MSR830 IPSEC/7/EVENT: SP is not complete when matching flow. *Jan 3 01:11:46:708 2011 MSR830 IPSEC/7/EVENT: Could not find tunnel, ike profile name is 1.
*Jan 3 01:11:46:708 2011 MSR830 IPSEC/7/EVENT: SP is not complete when matching flow.
请问下这种报错的原因是什么,ike可以起来,isec sa起不了
(0)
最佳答案
两边reset 下 ipsec sa ,是否存在对端的路由,感兴趣是否互相指定。方便的话贴下两边ipsec相关的配置
(0)
ipsec transform-set 2 esp encryption-algorithm 3des-cbc esp authentication-algorithm md5 # ipsec profile 2 isakmp # ipsec policy 2 2 isakmp transform-set 2 security acl 3001 local-address 1.192.177.243 ike-profile 2 # ike identity fqdn 2 # ike profile 2 keychain 2 exchange-mode aggressive local-identity fqdn 2 match remote identity fqdn 2 match local address 1.192.177.243 proposal 2 ike proposal 2 encryption-algorithm 3des-cbc dh group2 authentication-algorithm md5 # ike keychain 2 pre-shared-key address 0.0.0.0 0.0.0.0 key simple 123456
对端的呢
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
对端的呢