WA2610X要改成瘦AP,超级终端SecureCRT连接成功,只要输入命令ap-mode fit就可以了,由于长时间没用,命令忘了,输成ap fit,虽然下载了,但是没有热点。结果成了下面情况,回车后都是同样的提示,光标就是闪动。
Line con0 is available.
Press ENTER to get started.
重启ap,出现如下提示:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.......................Done!
****************************************************************************
* *
* H3C WA2610X BootWare, Version 7.06 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Mar 21 2017
CPU Type : AR9350
CPU L1 Cache : 32KB
CPU Clock Speed : 560MHz
Memory Type : DDR2 SDRAM
Memory Size : 128MB
Memory Speed : 480MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.C
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/wa2600a-system.bin......................................
....................................................Done.
Loading file flash:/wa2600a-boot.bin........................Done.
Image file flash:/wa2600a-boot.bin is self-decompressing....................
............................................................................
............................................................................
........................................................................
Done.
System image is starting...
Startup configuration file does not exist.
Line con0 is available.
Press ENTER to get started.
<H3C>%Jun 4 08:28:43:604 2020 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.
<H3C>ap%Jun 4 15:15:03:850 2020 70ba-ef15-e240 CWC/6/CWC_AP_UP: Master CAPWAP tunnel to AC 10.199.2.93 went up.
-
^
% Unrecognized command found at '^' position.
<70ba-ef15-e240>
<70ba-ef15-e240>ap-mode fit
^
% Unrecognized command found at '^' position.
<70ba-ef15-e240>cd
^
% Incomplete command found at '^' position.
<70ba-ef15-e240>cd
^
% Incomplete command found at '^' position.
<70ba-ef15-e240>system view
^
% Too many parameters found at '^' position.
<70ba-ef15-e240>%Jun 4 15:16:15:358 2020 70ba-ef15-e240 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/1 changed to down.
%Jun 4 15:16:15:360 2020 70ba-ef15-e240 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/1 changed to down.
%Jun 4 15:16:15:362 2020 70ba-ef15-e240 IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface1 changed to down.
%Jun 4 15:16:15:363 2020 70ba-ef15-e240 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface1 changed to down.
%Jun 4 15:16:15:371 2020 70ba-ef15-e240 CWC/4/CWC_AP_DOWN: Master CAPWAP tunnel to AC 10.199.2.93 went down. Reason: AP interface used for CAPWAP tunnel went down.
%Jun 4 15:16:21:359 2020 70ba-ef15-e240 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/1 changed to up.
%Jun 4 15:16:21:362 2020 70ba-ef15-e240 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/1 changed to up.
%Jun 4 15:16:21:375 2020 70ba-ef15-e240 IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface1 changed to up.
%Jun 4 15:16:21:386 2020 70ba-ef15-e240 IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface1 changed to up.
%Jun 4 15:16:24:350 2020 70ba-ef15-e240 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/1 changed to down.
%Jun 4 15:16:24:353 2020 70ba-ef15-e240 IF
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.......................Done!
****************************************************************************
* *
* H3C WA2610X BootWare, Version 7.06 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Mar 21 2017
CPU Type : AR9350
CPU L1 Cache : 32KB
CPU Clock Speed : 560MHz
Memory Type : DDR2 SDRAM
Memory Size : 128MB
Memory Speed : 480MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.C
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/wa2600a-system.bin......................................
....................................................Done.
Loading file flash:/wa2600a-boot.bin........................Done.
Image file flash:/wa2600a-boot.bin is self-decompressing....................
............................................................................
............................................................................
........................................................................
Done.
System image is starting...
Startup configuration file does not exist.
Line con0 is available.
Press ENTER to get started.
中途出现<H3C>,输入ap两个字母,又自动往下跳,无法完成命令输入。
不知如何才能完成改瘦AP,请教大侠帮忙。
是教育城域网无线,与有线分开的,各学校统一的。AP的软件都放在教育局机房的交换机上,只要输入命令会自动下载,其它AP都改成功,命令输错的不成功。
(0)
最佳答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论