H3C。ADSL的配置命令

您好，请知：

1、可参考如下PPPOE的配置命令：

[H3C]sysname PPPOE

[PPPOE]acl basic 2000

[PPPOE-acl-ipv4-basic-2000]rule 0 permit source any

[PPPOE-acl-ipv4-basic-2000]quit

[PPPOE]int gi 0/1

[PPPOE-GigabitEthernet0/1]des

[PPPOE-GigabitEthernet0/1]ip address 202.1.100.2 30

[PPPOE-GigabitEthernet0/1]nat outbound 2000

[PPPOE-GigabitEthernet0/1]quit

[PPPOE]ip route-static 0.0.0.0 0.0.0.0 202.1.100.1

[PPPOE]

PPPOE拨号关键配置点：

[PPPOE]local-user weijianing class network  //创建用户名、密码，赋予PPP登陆的权限

New local user added.

[PPPOE-luser-network-weijianing]password simple weijianing

[PPPOE-luser-network-weijianing]service-type ppp

[PPPOE-luser-network-weijianing]quit

[PPPOE]domain name system  //配置域，验证方式为本地PPP认证

[PPPOE-isp-system]authentication ppp local

[PPPOE-isp-system]quit

[PPPOE]ip pool weijianing 192.168.10.2 192.168.10.100  //创建地址池，用于PPPOE客户端拨号的IP地址分配

[PPPOE]int Virtual-Template 1  //创建虚拟模板，调用域和地址池

[PPPOE-Virtual-Template1]ip address 192.168.10.1 255.255.255.0

[PPPOE-Virtual-Template1]ppp authentication-mode pap domain system

[PPPOE-Virtual-Template1]remote address pool weijianing

[PPPOE-Virtual-Template1]quit

[PPPOE]int gi 0/0

[PPPOE-GigabitEthernet0/0]pppoe-server bind virtual-template 1  //将PPPOE与虚拟模板绑定到物理接口

[PPPOE-GigabitEthernet0/0]quit

2、以下是具体的案例连接，里面包含详细的配置过程及测试效果：

https://zhiliao.h3c.com/theme/details/101879