最佳答案
display ppp access-user命令用来显示PPP接入用户的信息。
# 查看IP地址为50.50.50.3的PPP接入用户的详细信息。
<Sysname> display ppp access-user ip-address 50.50.50.3
Basic:
Interface: VA0
User ID: 0x28000002
Username: user1@hrss
Domain: hrss
Access interface: RAGG22
Service-VLAN/Customer-VLAN: -/-
MAC address: 0000-0000-0001
IP address: 50.50.50.3
IPv6 address: -
IPv6 PD prefix: -
VPN instance: 123
Access type: PPPoE
Authentication type: CHAP
AAA:
Authentication state: Authenticated
Authorization state: Authorized
Realtime accounting switch: Open
Realtime accounting interval: 60s
Login time: 2013-1-19 2:42:3:358
Accounting start time: 2013-1-19 2:42:3:382
Online time(hh:mm:ss): 0:7:34
Accounting state: Accounting
Idle cut: 0 sec 0 byte
Session timeout: 12000 s
Time remained: 8000 s
Byte remained: 20971520 bytes
Redirect WebURL: http://6.6.6.6
ACL&QoS:
User profile: profile123 (active)
User group profile: -
Inbound CAR: CIR 64000bps PIR 640000bps
Outbound CAR: CIR 64000bps PIR 640000bps
NAT:
Global IP address: 111.8.0.200
Port block: 28744-28748
Flow Statistic:
IPv4 uplink packets/bytes: 7/546
IPv4 downlink packets/bytes: 0/0
IPv6 uplink packets/bytes: 0/0
IPv6 downlink packets/bytes: 0/0
ITA:
Level-1 uplink packets/bytes: 100/128000
downlink packets/bytes: 200/256000
Level-2 uplink packets/bytes: 100/128000
downlink packets/bytes: 200/256000
(1)
你这个50.50.50.3是分配给客户端的地址,用dis ppp access-user user-type lns就可以看到。我要的是远端remote地址。
刚刚那个命令用远端地址查,有回显吗?
好 一会搭环境测试下看有没有命令 晚点回复你
试了一下好像没有什么命令能看,命令手册这个命令我试了没输出,可以试一下,不行的话应该就是没有命令能看了 # 查看通过接口GigabitEthernet1/0/1上线的PPP接入用户的简要信息。 <Sysname> display ppp access-user interface gigabitethernet 1/0/1 Interface Username MAC address IP address IPv6 address IPv6 PDPrefix VA0 user1@h3c 0001-0101-9101 192.168.100.173 - VA1 user2@h3c 0001-0101-9101 192.168.80.173 2000::1
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
我也试过了,没任何显示。