问

交换机接口配置job命令

2020-06-19提问

1关注
1收藏，1281浏览

zhiliao_0n1PyE

zhiliao_0n1PyE 零段

粉丝：0人关注：0人

问题描述：

想要对某个接口进行定点开启关闭poe供电。job命令好像对整个服务器进行配置，没找到针对某个接口进行配置的。

组网及组网描述：

想要对某个接口进行定点开启关闭poe供电。job命令好像对整个服务器进行配置，没找到针对某个接口进行配置的。

最佳答案

奔跑的小鹿

奔跑的小鹿九段

粉丝：14人关注：4人

你是想实现什么功能吗，job具体是哪条命令呢，可以贴出来看看吗

我想在Ethernet1/0/13口，每天7:00开启poe供电，晚上5点关闭poe供电。

zhiliao_0n1PyE 发表时间：2020-06-19

1.13.4 定时执行任务典型配置举例 1. 组网需求对Device进行配置，在星期一到星期五的上午八点到下午十八点开启GigabitEthernet1/0/1和GigabitEthernet1/0/2，其它时间关闭端口，以便起到有效节能的作用。 2. 组网图图1-3 定时执行任务典型配置举例组网图 ‌ 3. 配置步骤 # 进入系统视图。 <Sysname> system-view # 创建关闭GigabitEthernet1/0/1的Job。 [Sysname] scheduler job shutdown-GigabitEthernet1/0/1 [Sysname-job-shutdown-GigabitEthernet1/0/1] command 1 system-view [Sysname-job-shutdown-GigabitEthernet1/0/1] command 2 interface gigabitethernet 1/0/1 [Sysname-job-shutdown-GigabitEthernet1/0/1] command 3 shutdown [Sysname-job-shutdown-GigabitEthernet1/0/1] quit # 创建开启GigabitEthernet1/0/1的Job。 [Sysname] scheduler job start-GigabitEthernet1/0/1 [Sysname-job-start-GigabitEthernet1/0/1] command 1 system-view [Sysname-job-start-GigabitEthernet1/0/1] command 2 interface gigabitethernet 1/0/1 [Sysname-job-start-GigabitEthernet1/0/1] command 3 undo shutdown [Sysname-job-start-GigabitEthernet1/0/1] quit # 创建关闭GigabitEthernet1/0/2的Job。 [Sysname] scheduler job shutdown-GigabitEthernet1/0/2 [Sysname-job-shutdown-GigabitEthernet1/0/2] command 1 system-view [Sysname-job-shutdown-GigabitEthernet1/0/2] command 2 interface gigabitethernet 1/0/2 [Sysname-job-shutdown-GigabitEthernet1/0/2] command 3 shutdown [Sysname-job-shutdown-GigabitEthernet1/0/2] quit # 创建开启GigabitEthernet1/0/2的Job。 [Sysname] scheduler job start-GigabitEthernet1/0/2 [Sysname-job-start-GigabitEthernet1/0/2] command 1 system-view [Sysname-job-start-GigabitEthernet1/0/2] command 2 interface gigabitethernet 1/0/2 [Sysname-job-start-GigabitEthernet1/0/2] command 3 undo shutdown [Sysname-job-start-GigabitEthernet1/0/2] quit # 配置定时执行任务，使Device在星期一到星期五的上午八点开启pc1、pc2对应的以太网端口。 [Sysname] scheduler schedule START-pc1/pc2 [Sysname-schedule-START-pc1/pc2] job start-GigabitEthernet1/0/1 [Sysname-schedule-START-pc1/pc2] job start-GigabitEthernet1/0/2 [Sysname-schedule-START-pc1/pc2] time repeating at 8:00 week-day mon tue wed thu fri [Sysname-schedule-START-pc1/pc2] quit # 配置定时执行任务，使Device在星期一到星期五的下午十八点关闭pc1、pc2对应的以太网端口。 [Sysname] scheduler schedule STOP-pc1/pc2 [Sysname-schedule-STOP-pc1/pc2] job shutdown-GigabitEthernet1/0/1 [Sysname-schedule-STOP-pc1/pc2] job shutdown-GigabitEthernet1/0/2 [Sysname-schedule-STOP-pc1/pc2] time repeating at 18:00 week-day mon tue wed thu fri [Sysname-schedule-STOP-pc1/pc2] quit 4. 验证配置 # 显示Job的配置信息。 [Sysname] display scheduler job Job name: shutdown-GigabitEthernet1/0/1 system-view interface gigabitethernet 1/0/1 shutdown Job name: shutdown-GigabitEthernet1/0/2 system-view interface gigabitethernet 1/0/2 shutdown Job name: start-GigabitEthernet1/0/1 system-view interface gigabitethernet 1/0/1 undo shutdown Job name: start-GigabitEthernet1/0/2 system-view interface gigabitethernet 1/0/2 undo shutdown # 显示定时任务的运行信息。 [Sysname] display scheduler schedule Schedule name : START-pc1/pc2 Schedule type : Run on every Mon Tue Wed Thu Fri at 08:00:00 Start time : Wed Sep 28 08:00:00 2011 Last execution time : Wed Sep 28 08:00:00 2011 Last completion time : Wed Sep 28 08:00:03 2011 Execution counts : 1 ----------------------------------------------------------------------- Job name Last execution status start-GigabitEthernet1/0/1 Successful start-GigabitEthernet1/0/2 Successful Schedule name : STOP-pc1/pc2 Schedule type : Run on every Mon Tue Wed Thu Fri at 18:00:00 Start time : Wed Sep 28 18:00:00 2011 Last execution time : Wed Sep 28 18:00:00 2011 Last completion time : Wed Sep 28 18:00:01 2011 Execution counts : 1 ----------------------------------------------------------------------- Job name Last execution status shutdown-GigabitEthernet1/0/1 Successful shutdown-GigabitEthernet1/0/2 Successful # 显示Job运行的输出信息。 [Sysname] display scheduler logfile Job name : start-GigabitEthernet1/0/1 Schedule name : START-pc1/pc2 Execution time : Wed Sep 28 08:00:00 2011 Completion time : Wed Sep 28 08:00:02 2011 --------------------------------- Job output ----------------------------------- <Sysname>system-view System View: return to User View with Ctrl+Z. [Sysname]interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1]undo shutdown Job name : start-GigabitEthernet1/0/2 Schedule name : START-pc1/pc2 Execution time : Wed Sep 28 08:00:00 2011 Completion time : Wed Sep 28 08:00:02 2011 --------------------------------- Job output ----------------------------------- <Sysname>system-view System View: return to User View with Ctrl+Z. [Sysname]interface gigabitethernet 1/0/2 [Sysname-GigabitEthernet1/0/2]undo shutdown Job name : shutdown-GigabitEthernet1/0/1 Schedule name : STOP-pc1/pc2 Execution time : Wed Sep 28 18:00:00 2011 Completion time : Wed Sep 28 18:00:01 2011 --------------------------------- Job output ----------------------------------- <Sysname>system-view System View: return to User View with Ctrl+Z. [Sysname]interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1]shutdown Job name : shutdown-GigabitEthernet1/0/2 Schedule name : STOP-pc1/pc2 Execution time : Wed Sep 28 18:00:00 2011 Completion time : Wed Sep 28 18:00:01 2011 --------------------------------- Job output ----------------------------------- <Sysname>system-view System View: return to User View with Ctrl+Z. [Sysname]interface gigabitethernet 1/0/2 [Sysname-GigabitEthernet1/0/2]shutdown

奔跑的小鹿发表时间：2020-06-19

没有scheduler这个命令

zhiliao_0n1PyE 发表时间：2020-06-19

具体型号是什么呢，可以提供一下吗

奔跑的小鹿发表时间：2020-06-19

2 个回答

按时间按赞数

得闲饮茶013

得闲饮茶013 九段

粉丝：132人关注：6人

您好，请知：

可以在交换机配置调度工具来实现定点的操作功能，根据您的需求，以下是具体的配置命令，请参考：

V7平台的命令如下：

1、配置调度工作

[H3C]scheduler job beifen //创建调度工作

[H3C-job-beifen]command 1 int gi 1/0/1 //配置第一个命令，进入接口gi 1/0/1

[H3C-job-beifen]command 2 undo poe enable //配置第二个命令，关闭接口POE功能

[H3C-job-beifen]quit

2、配置调度策略

[H3C]scheduler schedule beifen //创建调度策略

[H3C-schedule-beifen]job beifen //调用调度工作

[H3C-schedule-beifen]time repeating at 00:00 month-date last //指定调度策略运行的时间为每个月最后一天的0点

[H3C-schedule-beifen]quit

V5平台的命令如下：

job 1 //创建工作任务1

time 1 repeating at 00:00 command int gi 1/0/1

time 2 repeating at 00:01 command undo poe enable

quit

没有scheduler这个命令

zhiliao_0n1PyE 发表时间：2020-06-19

您好，请问您交换机是多少版本的呢？

得闲饮茶013 发表时间：2020-06-19

H3C S3100V2-16TP-PWR-EI，Version 5.20

zhiliao_0n1PyE 发表时间：2020-06-19

您好，以下是V5平台的命令： V5平台的命令如下： job 1 //创建工作任务1 time 1 repeating at 00:00 command int gi 1/0/1 time 2 repeating at 00:00 command undo poe enable view 1 quit

得闲饮茶013 发表时间：2020-06-19