现有一台H3C FW1000-S防火墙设备,串口可以登录,设置了用户名口令web界面无法登录,如下图所示 点击登录没有任何反应在后台查看用户设置# local-user admin password simple admin service-type telnet level 3 local-user h3c password simple h3c service-type ssh telnet terminal level 3 service-type ppp也设置了# user-interface con 0 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme web设置的选项没有,如下所示求教还能如何处理
(0)
最佳答案
开启web服务是
ip http en
V5设备用户网页登录需要赋权web
如
sys
local-u h3c
ser web
(0)
ip http ? 后面显示的是acl 和 shutdown 没有enable开启 用户视图模式下,也没有wen选项,只有 [H3C-luser-h3c]service-type ? dvpn DVPN service type ftp FTP service type ppp Specify user type to ppp ssh Secure Shell service type telnet TELNET service type terminal TERMINAL service type
设备完整型号是多少 F1000-S-EI?还是F1000-S-AI?
H3C Comware Software Comware software, Version 3.40, Feature 1650 Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd. All rights reserved. Without the owner's prior written consent, no decompiling nor reverse-engineering shall be allowed. H3C SecPath F1000-S uptime is 0 week, 0 day, 0 hour, 33 minutes CPU type: Mips BCM1125H 600MHz 512M bytes DDR SDRAM Memory 16M bytes Flash Memory Pcb Version:3.0 Logic Version:2.0 BootROM Version:1.27 [SLOT 0] 2GBE (Hardware)3.0, (Driver)2.0, (Cpld)2.0 [SLOT 1] 2GBE (Hardware)3.0, (Driver)2.0, (Cpld)2.0 [SLOT 2] NDEC (Hardware)3.0, (Driver)3.3, (Cpld)2.0 很老的设备了,还是不确定具体是-E还是-A
您好,请知:
1、请确认登录的用户已赋予WEB登陆权限,参考命令如下:
local-user h3c
service-type web
quit
2、请确认已经开启了WEB功能,参考命令如下:
ip http enable
ip https enable
3、请确认终端能PING通防火墙。
4、如果不支持WEB的命令,升级版本到最新看下。
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
[H3C-luser-h3c]service-type ? dvpn DVPN service type ftp FTP service type ppp Specify user type to ppp ssh Secure Shell service type telnet TELNET service type terminal TERMINAL service type 用户视图下没有HTTP选项,没办法操作