h3c wap722s

瘦切胖：

1：官网下载胖ap的版本，根据版本说明书的要求修改文件名：

2：将该版本使用tftp导入ap，之前先查看内存是否够用，如果不够可以

         delete /unreserved xxxx.xx

         或者 delete xxx.xx 然后reset recycle-bin

3：指定下次启动的文件

    boot-loader file xxxx.xx.bin main

4： reboot 第一次n 第二次y

重启完成后可用192.168.0.50管理ap

<WAP722S>dis int brief

The brief information of interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface            Link Protocol Main IP         Description

NULL0                UP   UP(s)    --

Vlan1                UP   UP       192.168.0.50

WLAN-Radio1/0/1      UP   UP       --

WLAN-Radio1/0/2      UP   UP       --

The brief information of interface(s) under bridge mode:

Link: ADM - administratively down; Stby - standby

Speed or Duplex: (a)/A - auto; H - half; F - full

Type: A - access; T - trunk; H - hybrid

Interface            Link Speed   Duplex Type PVID Description

GE1/0/1              UP   1G(a)   F(a)   A    1

WLAN-BSS32           DOWN --      --     H    1

WLAN-BSS33           UP   --      --     H    1

胖切瘦：

1.  Web页面

登录到web页面以后在高级中选择形态切换可以从fat切换到fit，切换到fit后需要ac上配置了dhcp server，ap会在获取到地址以后从ac上下载版本。

2.命令行

//查看当前的bin文件，以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。

<H3C>dir

Directory of flash:/

   0     -rw-   9124864  Apr 26 2000 18:14:29   wa2600a_fat.bin

15057 KB total (6144 KB free)

//配置模式切换命令

<H3C>ap-mode fit

 Change working mode will reboot system, do you want to continue? [Y/N]:y

 Change working mode to FIT now? [Y/N]:y

//从无线控制器上查看信息：AP从AC上获取ip地址

%Apr 26 18:21:20:262 2000 WX3024-AC DHCPS/5/DHCPS_ALLOCATE_IP: DHCP server information: Server IP = 192.168.0.1, DHCP client IP = 192.168.0.2, DHCP client hardware address = 7425-8a33-8170, DHCP client lease = 86400.

//AP开始从AC上下载bin文件

%Apr 26 18:21:24:788 2000 WX3024-AC LWPS/6/LWPS_IMG_DOWNLOAD_START: 

Image download in progress for AP ap2.

#Apr 26 18:21:33:642 2000 WX3024-AC LWPS/4/Download Image Successfully:  Download Image Successfully:1.3.6.1.4.1.2011.10.2.75.2.3.0.14<h3cDot11APImgDwldSuccess> Serial Id:219801A0FH9136Q00287 AP Name:ap2 IP:192.168.0.2 Version:V100R001B01D001

%Apr 26 18:21:33:672 2000 WX3024-AC LWPS/6/LWPS_IMG_DOWNLOAD_COMPLETE: 

 Image download process completed for AP ap2.

//这时AP已经下载完bin文件，重启中

%Apr 26 18:22:03:101 2000 WX3024-AC DHCPS/5/DHCPS_RECLAIM_IP: DHCP server information: Server IP = 192.168.0.1, DHCP client IP = 192.168.0.2, DHCP client hardware address = 7425-8a33-8170, DHCP client lease = 86400.

%Apr 26 18:23:23:841 2000 WX3024-AC DHCPS/5/DHCPS_ALLOCATE_IP: DHCP server information: Server IP = 192.168.0.1, DHCP client IP = 192.168.0.2, DHCP client hardware address = 7425-8a33-8170, DHCP client lease = 86400.

//AP切换为Fit模式后注册到AC上

#Apr 26 18:23:28:381 2000 WX3024-AC LWPS/4/Tunnel Up:  Tunnel Up:1.3.6.1.4.1.2011.10.2.75.1.3.0.1<h3cDot11ACMtTunnelSetupTrap> Serial Id:219801A0FH9136Q00287 UpInfo:1 AP Name:ap2 IPv4:192.168.0.2 IPv6:-NA- FirstTrapTime:2291326 AP MAC:74:25:8A:33:81:70

#Apr 26 18:23:28:412 2000 WX3024-AC IFNET/4/INTERFACE UPDOWN:

 Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 12976129 is Up, ifAdminStatus is 1, ifOperStatus is 1 

%Apr 26 18:23:28:432 2000 WX3024-AC LWPS/6/LWPS_AP_UP: 

 Connection with AP ap2 goes operational.

%Apr 26 18:23:28:443 2000 WX3024-AC IFNET/3/LINK_UPDOWN: WLAN-DBSS10:3 link status is UP.

%Apr 26 18:23:28:453 2000 WX3024-AC IFNET/3/LINK_UPDOWN: WLAN-ESS10 link status is UP.