请问一下如何将华三的WA4320-ACN-D AP刷成胖的？，有没有详细步骤

1. 使用Console口登入到命令行，从官网下载WAP621的软件版本，将压缩包解压，将里面的文件名称修改为waxxx_fat.bin

2. 电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把软件版本WAxxxx_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定

 

3. 在AP重启的时候按住Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。

===============<EXTEND-BOOTWARE MENU>=========================

|<1> Boot System

|<2> Enter Serial SubMenu

|<3> Enter Ethernet SubMenu

|<4> File Control

|<5> Restore to Factory Default Configuration

|<6> Skip Current System Configuration

|<7> BootWare Operation Menu

|<8> Clear Super Password

|<9> Storage Device Operation

|<0> Reboot

===============================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): Ctrl+F

y

Enter your choice(0-9): 3（此处输入）

================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And Run

|<2> Update Main Application File

|<3> Update Backup Application File

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

|<0> Exit To Main Menu

|<Ensure The Parameter Be Modified Before Downloading!> 

                  =============================================================

4. 进入修改以太网参数菜单，使用TFTP网络协议传输wa2600a_fat.bin到AP上

Enter your choice(0-5): 5

===========<ETHERNET PARAMETER SET>=====================

|Note:       '.' = Clear field.

|            '-' = Go to previous field.

|          Ctrl+D = Quit.

===============================================================

Protocol (FTP or TFTP) : TFTP

//忽略输出内容，直接输入TFTP，然后回车

Load File Name         :wa2600a_fat.bin

//忽略输出内容，直接输入wa2600a_fat.bin，然后回车

Target File Name       :wa2600a_fat.bin  

//忽略输出内容，直接输入wa2600a_fat.bin，然后回车

Server IP Address      :192.168.0.1   

//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车

Local IP Address       :192.168.0.50

//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车

Gateway IP Address     :0.0.0.0

//忽略输出内容，直接回车

备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达

 

=============<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And

|<2> Update Main Application File

|<3> Update Backup Application File

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

|<0> Exit To Main Menu

|<Ensure The Parameter Be Modified Before Downloading!>

 

=============================================================

Enter your choice(0-5): 2   //此时可以看到TFTP服务器上数据上传的滚动

Loading.....................................................................

....................................Done!

5. 返回主菜单，查看设备上是否真的已经上传了该软件版本

=================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And R

|<2> Update Main Application File

|<3> Update Backup Application Fil

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

||<0> Exit To Main Menu

|<Ensure The Parameter Be Modified Before Downloading!>

                   |=================================================================

Enter your choice(0-5): 0

===============<EXTEND-BOOTWARE MENU>===========================

<1> Boot System

<2> Enter Serial SubMenu

<3> Enter Ethernet SubMenu

<4> File Control

<5> Restore to Factory Default Configuration

<6> Skip Current System Configuration

<7> BootWare Operation Menu

<8> Clear Super Password

<9> Storage Device Operation

<0>Reboot                                                                ==========================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 4

=====================<File CONTROL>===============================

|Note:the operating device is flash

<1> Display All File(s)

<2> Set Application File type

<3> Delete File

<0> Exit To Main Menu

==============================================================

Enter your choice(0-3): 1

Display all file(s) in flash:

 

|NO. Size(B)   Time                 Type   Name                          

||1   9124864   Aug/08/2008 20:00:00 M      wa2600a_fat.bin                

==============================================================

6. 返回主菜单，将设备进行重启

|Note:the operating device is flash

<1> Display All File(s)

<2> Set Application File type

<3> Delete File

<0> Exit To Main Menu

=================================================================

Enter your choice(0-3): 0

==================<EXTEND-BOOTWARE MENU>===========================

<1> Boot System

<2> Enter Serial SubMenu

<3> Enter Ethernet SubMenu

<4> File Control

<5> Restore to Factory Default Configuration

<6> Skip Current System Configuration

<7> BootWare Operation Menu

<8> Clear Super Password

<9> Storage Device Operation

<0>Reboot                                                                ==================================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 0

System is starting...