(PhysicalIndex=1565, PhysicalName=Ten-GigabitEthernet3/0/46, RelativeResource=(interface:port down), ErrorCode=482002, Reason=The interface Physical state changed to down.) %Aug 25 08:51:43:908 2025 H3C_S10508X-G_B02_2-13U_HX-SW1 DEV/2/INTERNALLINK_ALARM_OCCUR: Internal link alarm occurred. (PhysicalIndex=1565, PhysicalName=Ten-GigabitEthernet3/0/46, RelativeResource=(bustype:mac link,

Reason=The interface Physical state changed to up.) %Sep 16 22:30:11:195 2025 SH-LG-B09-M402-K09-H3CS9825-NM18-G0-04008 IFNET/3/PHY_UPDOWN: Physical state on the interface TwoHundredGigE1/0/51:2 changed to up. %Sep 16 22:30:11:330 2025 SH-LG-B09-M402-K09-H3CS9825-NM18-G0-04008 DEV/2/INTERNALLINK_ALARM_OCCUR: Internal link alarm occurred. (PhysicalIndex=264, PhysicalName=TwoHundredGigE1/0/51:2,

Reason=PHY chip link failure detected.) %Jul 22 15:54:46:103 2024 h3c DEV/2/INTERNALLINK_ALARM_OCCUR: Internal link alarm occurred. (PhysicalIndex=229, PhysicalName=GigabitEthernet1/0/32, RelativeResource=(bustype:mac link, sourceport:(chiptype:4, slot:1, chipid:0, portid:43)), ErrorCode=427001,

无需处理，彻底解决需要升级R6715HS03补丁解决 Board alarm occurred. (PhysicalIndex=415, PhysicalName=PSU 1, RelativeResource=(chiptype:PHY,chasiss:0,slot:2,subslot:1,chipid:0,port:50), ErrorCode=428003, Reason= The PHY chip failed to initialize. on port XGE2/1/9)

核心交换机堆叠，突然报这个错 H3C 交换机报错 WARNING: Ucast IPC packets from chassis 1 slot 0 to chassis 1 slot 1 were blocked.，表示交换机的单播IPC报文被阻塞了。 IPC是Inter-Process Communication的缩写，指的是进程间通信。 单播IPC报文是指从一个进程发送到另一个进程的报文，用于传递控制信息或数据。 如果单播IPC报文被阻塞，可能会导致交换机功能异常或业务中断。 单播IPC报文被阻塞的原因可能有以下几种：交换机堆叠分裂，导致堆叠内部通信链路中断。 交换机板卡故障，导致板卡间通信异常。 交换机软件版本不兼容，导致板卡间通信协议不一致。 交换机配置错误，导致板卡间通信参数不匹配。 为了解决这个问题，您可以尝试以下几种方法：检查交换机堆叠状态，确认堆叠是否正常运行。

check. %@212588^Jan 3 17:12:57:792 2020 S7610-1 DRVMNT/3/ERRORCODE: -Slot=0; MdcId=1-ModuleId=0xf6e-Level=3; ErrCode = 0x6f6e0006, Ucast IPC packets from Slot 3 to Slot 0 have been blocked, please chec...

无 S12500X-AF slot 19突然出现IPC block告警 %Dec 29 11:15:18:539 2019S12516X-AF DRVPLAT/2/DrvDebug: The specified fabric-board 19 does not work. %Dec 29 11:16:53:644 2019S12516X-AF DRVMNT/3/ERRORCODE: -Slot=19; MdcId=1; ErrCode...

无 设备slot 21网板突然出现如下GOLD IPC报错： %Aug 20 13:17:49:123 2019 S12516X-AF DRVMNT/3/ERRORCODE: -Slot=21; MdcId=1; ErrCode = f6e, GOLD: Ipc Block. %Aug 20 13:17:49:123 2019 S12516X-AF DRVPLAT/4/DrvDebug: -Slot=21; WARNING: Ucast

【交换机型号】：HP DC04 Power Pack+ SAN Director Switch 交换机有如下报错：DCX22交换机报C2-1012 S2,P-1(6): Link Timeout on internal port ftx=-1759860873 tov=2000 (>1000) vc_no=30 crd(s)lost=3 complete_loss:1. 这个报错的解释如下： Slot2 Port1本身是个外部口，但Slot 2blade内部还有个内连口

[mlagd.NOTICE]: [LIB_COMMU.NOTICE] recv() failed with err(110): Connection timed out Oct 20 23:02:48 DC1-C7000-01-SX1018-5 mlagd[6806]: TID 1260385424: [mlagd.NOTICE]: [MLAG_COMM_LAYER_WRAPPER.NOTICE] Connection failure on tcp receive blocking: handle 41, tcp port 51235, ip address 0x0a0a0a02, err -110 Oct 20 23:02:48 DC1-C7000-01-SX1018-5 mlagd[6806]: TID 1260385424: [mlagd.NOTICE]: