组网说明:
本案例采用H3C HCL模拟器来模拟使用IPV6地址通过SSH对交换机进行远程登录管理。
1、按照网络拓扑图正确配置IP地址及划分VLAN
2、SW1开启SSH服务,并创建相应用户及赋予权限
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]sysname SW1
[SW1]vlan 10
[SW1-vlan10]quit
[SW1]int vlan 10
[SW1-Vlan-interface10]ipv6 address 1::1 64
[SW1-Vlan-interface10]quit
[SW1]int gi 1/0/3
[SW1-GigabitEthernet1/0/3]port link-type access
[SW1-GigabitEthernet1/0/3]port access vlan 10
[SW1-GigabitEthernet1/0/3]quit
[SW1]ssh server enable
[SW1]local-user weijianing
New local user added.
[SW1-luser-manage-weijianing]password simple weijianing
[SW1-luser-manage-weijianing]service-type ssh
[SW1-luser-manage-weijianing]quit
[SW1]ssh user weijianing service-type all authentication-type password
[SW1]line vty 0 4
[SW1-line-vty0-4]authentication-mode scheme
[SW1-line-vty0-4]protocol inbound ssh
[SW1-line-vty0-4]quit
测试:
物理机填写IP地址,且可以PING通网关:
打开CRT:
输入IPV6地址和用户名,点击连接:
输入密码,点击确定:
登录成功:
至此,使用IPV6地址通过SSH远程登陆交换机的典型组网配置案例已完成!
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作