组网说明:
本案例采用H3C HCL模拟器的S5820来模拟IPV6 ospfv3与静态路由重分布的典型组网配置。SW1与SW2运行OSPFV3路由协议,SW2与SW3运行静态路由协议,为了实现物理机能够PING通SW3,因此需要在SW2配置OSPFV3与静态路由重分布。
1、按照网络拓扑图正确配置IP地址
2、SW1与SW2运行OSPFV3路由协议
3、SW2与SW3运行静态路由协议
4、SW2配置OSPFV3与静态路由重分布
SW1:
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]sysname SW1
[SW1]int gi 1/0/2
[SW1-GigabitEthernet1/0/2]port link-mode route
[SW1-GigabitEthernet1/0/2]ipv6 address 1::1 64
[SW1-GigabitEthernet1/0/2]quit
[SW1]int gi 1/0/1
[SW1-GigabitEthernet1/0/1]port link-mode route
[SW1-GigabitEthernet1/0/1]description <connect to SW2>
[SW1-GigabitEthernet1/0/1]ipv6 address 2::1 64
[SW1-GigabitEthernet1/0/1]quit
[SW1]int loopback 0
[SW1-LoopBack0]ip address 1.1.1.1 32
[SW1-LoopBack0]quit
[SW1]int loopback 1
[SW1-LoopBack1]ipv6 address 4::1 64
[SW1-LoopBack1]quit
SW1 OSPFV3关键配置点:
[SW1]ospfv3 1
[SW1-ospfv3-1]import-route direct
[SW1-ospfv3-1]router-id 1.1.1.1
[SW1-ospfv3-1]quit
[SW1]int loopback 1
[SW1-LoopBack1]ospfv3 1 area 0
[SW1-LoopBack1]quit
[SW1]int gi 1/0/1
[SW1-GigabitEthernet1/0/1]ospfv3 1 area 0
[SW1-GigabitEthernet1/0/1]quit
[SW1]int gi 1/0/2
[SW1-GigabitEthernet1/0/2]ospfv3 1 area 0
[SW1-GigabitEthernet1/0/2]quit
SW2:
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]sysname SW2
[SW2]int loopback 0
[SW2-LoopBack0]ip address 2.2.2.2 32
[SW2-LoopBack0]quit
[SW2]int loopback 1
[SW2-LoopBack1]ipv6 address 5::1 64
[SW2-LoopBack1]quit
[SW2]int gi 1/0/1
[SW2-GigabitEthernet1/0/1]port link-mode route
[SW2-GigabitEthernet1/0/1]des <connect to SW1>
[SW2-GigabitEthernet1/0/1]ipv6 address 2::2 64
[SW2-GigabitEthernet1/0/1]quit
[SW2]int gi 1/0/2
[SW2-GigabitEthernet1/0/2]port link-mode route
[SW2-GigabitEthernet1/0/2]des <connect to SW3>
[SW2-GigabitEthernet1/0/2]ipv6 address 3::2 64
[SW2-GigabitEthernet1/0/2]quit
SW2 OSPFV3与静态路由重分布关键配置点:
[SW2]ospfv3 1
[SW2-ospfv3-1]import-route direct
[SW2-ospfv3-1]import-route static
[SW2-ospfv3-1]router-id 2.2.2.2
[SW2-ospfv3-1]quit
[SW2]int loopback 1
[SW2-LoopBack1]ospfv3 1 area 0
[SW2-LoopBack1]quit
[SW2]int gi 1/0/1
[SW2-GigabitEthernet1/0/1]ospfv3 1 area 0
[SW2-GigabitEthernet1/0/1]quit
[SW2]ipv6 route-static 6:: 64 3::1
SW3:
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]sysname SW3
[SW3]int loopback 0
[SW3-LoopBack0]ip address 3.3.3.3 32
[SW3-LoopBack0]quit
[SW3]int loopback 1
[SW3-LoopBack1]ipv6 address 6::1 64
[SW3-LoopBack1]quit
[SW3]int gi 1/0/2
[SW3-GigabitEthernet1/0/2]port link-mode route
[SW3-GigabitEthernet1/0/2]des <connect to SW2>
[SW3-GigabitEthernet1/0/2]ipv6 address 3::1 64
[SW3-GigabitEthernet1/0/2]quit
SW3 静态路由关键配置点:
[SW3]ipv6 route-static 1:: 64 3::2
[SW3]ipv6 route-static 2:: 64 3::2
[SW3]ipv6 route-static 4:: 64 3::2
[SW3]ipv6 route-static 5:: 64 3::2
测试:
物理机填写IPV6地址:
物理机能PING通SW3的loopback 1:
分别查看SW1、SW2的OSPFV3邻居信息:
分别查看SW1、SW2、SW3的IPV6路由表:
<SW1>dis ipv6 routing-table
Destinations : 13 Routes : 13
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 1::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : GE1/0/2 Cost : 0
Destination: 1::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 2::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : GE1/0/1 Cost : 0
Destination: 2::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 3::/64 Protocol : O_ASE2
NextHop : FE80::52DB:69FF:FE05:206 Preference: 150
Interface : GE1/0/1 Cost : 1
Destination: 4::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : Loop1 Cost : 0
Destination: 4::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 5::/64 Protocol : O_ASE2
NextHop : FE80::52DB:69FF:FE05:206 Preference: 150
Interface : GE1/0/1 Cost : 1
Destination: 5::1/128 Protocol : O_INTRA
NextHop : FE80::52DB:69FF:FE05:206 Preference: 10
Interface : GE1/0/1 Cost : 1
Destination: 6::/64 Protocol : O_ASE2
NextHop : FE80::52DB:69FF:FE05:206 Preference: 150
Interface : GE1/0/1 Cost : 1
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : InLoop0 Cost : 0
Destination: FF00::/8 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
<SW1>
[SW2]dis ipv6 routing-table
Destinations : 13 Routes : 13
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 1::/64 Protocol : O_INTRA
NextHop : FE80::52DB:61FF:FE71:106 Preference: 10
Interface : GE1/0/1 Cost : 2
Destination: 2::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : GE1/0/1 Cost : 0
Destination: 2::2/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 3::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : GE1/0/2 Cost : 0
Destination: 3::2/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 4::/64 Protocol : O_ASE2
NextHop : FE80::52DB:61FF:FE71:106 Preference: 150
Interface : GE1/0/1 Cost : 1
Destination: 4::1/128 Protocol : O_INTRA
NextHop : FE80::52DB:61FF:FE71:106 Preference: 10
Interface : GE1/0/1 Cost : 1
Destination: 5::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : Loop1 Cost : 0
Destination: 5::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 6::/64 Protocol : Static
NextHop : 3::1 Preference: 60
Interface : GE1/0/2 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : InLoop0 Cost : 0
Destination: FF00::/8 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
[SW2]
[SW3]dis ipv6 routing-table
Destinations : 11 Routes : 11
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 1::/64 Protocol : Static
NextHop : 3::2 Preference: 60
Interface : GE1/0/2 Cost : 0
Destination: 2::/64 Protocol : Static
NextHop : 3::2 Preference: 60
Interface : GE1/0/2 Cost : 0
Destination: 3::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : GE1/0/2 Cost : 0
Destination: 3::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 4::/64 Protocol : Static
NextHop : 3::2 Preference: 60
Interface : GE1/0/2 Cost : 0
Destination: 5::/64 Protocol : Static
NextHop : 3::2 Preference: 60
Interface : GE1/0/2 Cost : 0
Destination: 6::/64 Protocol : Direct
NextHop : :: Preference: 0
Interface : Loop1 Cost : 0
Destination: 6::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : InLoop0 Cost : 0
Destination: FF00::/8 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
[SW3]
至此,S5820 IPV6 OSPFV3与静态路由重分布典型组网配置案例已完成!
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作