本案例为S3600本地端口镜像配置,其中G1/0/27为源端口,G1/0/28为目的端口。
S3600版本信息如下:
H3C Comware Platform Software
Comware Software, Version 5.20, Release 2112
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C S3600V2-28TP-EI uptime is 1 week, 2 days, 4 hours, 2 minutes
H3C S3600V2-28TP-EI with 1 Processor
256M bytes SDRAM
2M bytes Nor Flash Memory
128M bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is Ver.A
CPLD Version is 001
BootRom Version is 133
[SubSlot 0] 24FE+4SFP+2Combo GE Hardware Version is Ver.A
登录网页版:
点击“设备”:
点击“端口镜像”:
点击“新建”:
输入镜像组的ID,点击“应用”:
点击“修改端口”:
指定源端口:选择“镜像组ID”、选择端口类型为“Mirror port”,监控方向为“both”,在交换机面板选择“27”后点击应用,说明27口为镜像口。
指定目的端口:选择“镜像组ID”、选择端口类型为“Monitor port”,在交换机面板选择“28”后点击应用,说明28口为目的端口。
配置完成:
至此,S3600本地端口镜像配置(WEB版)已完成!
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作