本案例采用H3C S6800与思科2960对接二层链路聚合典型组网
H3C S6800版本信息如下:
H3C Comware Software, Version 7.1.045, Release 2418P05
Copyright (c) 2004-2015 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S6800-4C uptime is 239 weeks, 4 days, 7 hours, 2 minutes
Last reboot reason : USER reboot
Boot image: flash:/s6800-cmw710-boot-r2418p05.bin
Boot image version: 7.1.045, Release 2418P05
Compiled Jun 09 2015 12:06:42
System image: flash:/s6800-cmw710-system-r2418p05.bin
System image version: 7.1.045, Release 2418P05
Compiled Jun 09 2015 12:06:42
思科2960版本信息如下:
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 28-Sep-10 13:44 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01400000
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
anquanpingtai-ha-v4-1 uptime is 2 years, 44 weeks, 1 day, 11 hours, 18 minutes
System returned to ROM by power-on
System restarted at 23:37:34 UTC Wed Jul 19 2017
System image file is "flash:c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C2960G-48TC-L (PowerPC405) processor (revision H0) with 65536K bytes of memory.
Processor board ID FOC1520W692
Last reset from power-on
6 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 20:37:06:04:0C:00
Motherboard assembly number : 73-10300-12
Power supply part number : 341-0098-02
Motherboard serial number : FOC15200C86
Power supply serial number : DCA151090Q4
Model revision number : H0
Motherboard revision number : A0
Model number : WS-C2960G-48TC-L
System serial number : FOC1520W692
Top Assembly Part Number : 800-27071-06
Top Assembly Revision Number : D0
Version ID : V06
CLEI Code Number : COMB800BRA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 48 WS-C2960G-48TC-L 12.2(50)SE5 C2960-LANBASEK9-M
Configuration register is 0xF
S6800的XGE1/1/7、XGE2/1/7端口分别与思科2960的G0/47、G0/48端口互联
S6800二层链路聚合的配置如下:
interface Bridge-Aggregation7
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 2 to 4094
quit
interface Ten-GigabitEthernet1/1/7
port link-mode bridge
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 2 to 4094
stp root-protection
port link-aggregation group 7
quit
interface Ten-GigabitEthernet2/1/7
port link-mode bridge
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 2 to 4094
stp root-protection
port link-aggregation group 7
quit
思科2960二层链路聚合配置如下:
interface Port-channel1
switchport trunk allowed vlan 4,5,12,400
switchport mode trunk
exit
interface GigabitEthernet0/47
switchport trunk allowed vlan 4,5,12,400
switchport mode trunk
channel-group 1 mode on
exit
interface GigabitEthernet0/48
switchport trunk allowed vlan 4,5,12,400
switchport mode trunk
channel-group 1 mode on
exit
查看S6800的链路聚合状态均为S:
dis link-aggregation verbose Bridge-Aggregation 7
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected, I -- Individual
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation7
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Priority Oper-Key
--------------------------------------------------------------------------------
XGE1/1/7 S 32768 15
XGE2/1/7 S 32768 15
查看思科2960链路聚合状态:
show interfaces port-channel 1 status
Port Name Status Vlan Duplex Speed Type
Po1 connected trunk a-full a-1000
show interfaces port-channel 1 etherchannel
Age of the Port-channel = 856d:09h:03m:05s
Logical slot/port = 2/1 Number of ports = 2
GC = 0x00000000 HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = -
Port security = Disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------+------------------+-----------
0 00 Gi0/47 On 0
0 00 Gi0/48 On 0
Time since last port bundled: 65d:10h:10m:38s Gi0/47
Time since last port Un-bundled: 65d:10h:22m:25s Gi0/47
至此,S6800与思科2960对接二层链路聚合典型组网配置案例已完成!
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作