不涉及
本案例为两台S6800-54QF无法IRF堆叠,在进行IRF堆叠时提示
The port Ten2/0/1 can"t receive irf pkt, please check.
The Vxlan mode configurations should be the same on devices in one IRF.Please check them on the neighbor device connected to IRF-port 2
S6800-54QF 版本信息如下:
H3C Comware Software, Version 7.1.070, Release 2612P06
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd. All rights reserved.
H3C S6800-54QF uptime is 0 weeks, 0 days, 0 hours, 29 minutes
Last reboot reason : User reboot
Boot image: flash:/s6800-cmw710-boot-r2612p06.bin
Boot image version: 7.1.070, Release 2612P06
Compiled Sep 26 2019 11:00:00
System image: flash:/s6800-cmw710-system-r2612p06.bin
System image version: 7.1.070, Release 2612P06
Compiled Sep 26 2019 11:00:00
1、检查IRF绑定的端口及线缆都没有问题。
2、检查IRF的配置是否已指定了成员、端口也没有问题,IRF也已激活
3、使用dis hardware-resource发现堆叠两台设备硬件资源模式不同,具体反馈如下:
Switch-mode resource(switch-mode), all supported modes:
0 MAC table is 288K, L3 host table is 16K, LPM Table is 16K
1 MAC table is 224K, L3 host table is 80K, LPM Table is 16K
2 MAC table is 160K, L3 host table is 144K, LPM Table is 16K
3 MAC table is 96K, L3 host table is 208K, LPM Table is 16K
4 MAC table is 32K, L3 host table is 16K, LPM Table is 250K
-----------------------------------------------
Default Current Next
0 0 0
Routing-mode resource(routing-mode), all supported modes:
ipv6-64 ipv6-64 supported
ipv6-128 ipv6-128 supported
-----------------------------------------------
Default Current Next
ipv6-64 ipv6-64 ipv6-64
Vxlan resource(vxlan), all supported modes:
l2gw L2 gateway--underlay/overlay 48K/0K
l3gw8k L3 gateway--underlay/overlay 40K/8K
l3gw16k L3 gateway--underlay/overlay 32K/16K
l3gw24k L3 gateway--underlay/overlay 24K/24K
l3gw32k L3 gateway--underlay/overlay 16K/32K
l3gw40k L3 gateway--underlay/overlay 8K/40K
border8k Border--underlay/overlay 40K/8K
border16k Border--underlay/overlay 32K/16K
border24k Border--underlay/overlay 24K/24K
border32k Border--underlay/overlay 16K/32K
border40k Border--underlay/overlay 8K/40K
-----------------------------------------------
Default Current Next
l2gw border40k border40k
Switch-mode resource(switch-mode), all supported modes:
0 MAC table is 288K, L3 host table is 16K, LPM Table is 16K
1 MAC table is 224K, L3 host table is 80K, LPM Table is 16K
2 MAC table is 160K, L3 host table is 144K, LPM Table is 16K
3 MAC table is 96K, L3 host table is 208K, LPM Table is 16K
4 MAC table is 32K, L3 host table is 16K, LPM Table is 250K
-----------------------------------------------
Default Current Next
0 0 0
Routing-mode resource(routing-mode), all supported modes:
ipv6-64 ipv6-64 supported
ipv6-128 ipv6-128 supported
-----------------------------------------------
Default Current Next
ipv6-64 ipv6-64 ipv6-64
Vxlan resource(vxlan), all supported modes:
l2gw L2 gateway--underlay/overlay 48K/0K
l3gw8k L3 gateway--underlay/overlay 40K/8K
l3gw16k L3 gateway--underlay/overlay 32K/16K
l3gw24k L3 gateway--underlay/overlay 24K/24K
l3gw32k L3 gateway--underlay/overlay 16K/32K
l3gw40k L3 gateway--underlay/overlay 8K/40K
border8k Border--underlay/overlay 40K/8K
border16k Border--underlay/overlay 32K/16K
border24k Border--underlay/overlay 24K/24K
border32k Border--underlay/overlay 16K/32K
border40k Border--underlay/overlay 8K/40K
-----------------------------------------------
Default Current Next
l2gw l3gw24k l3gw24k
其中一台的硬件资源模式为border40k ,一台为 l3gw24k ,硬件资源不一样是无法IRF堆叠上的。
修改其中一台的硬件资源模式即可,参考命令如下:
[H3C]hardware-resource vxlan l3gw24k
Do you want to change the specified hardware resource working mode? [Y/N]:y
The hardware resource working mode is changed, please save the configuration and reboot the system to make it effective.
修改完成后注意保存配置,然后重启就可以完成IRF堆叠。
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
感谢您的支持!