设备:F1070
角色:IPSec响应方,Template模式
本端公网 IP:58.211.xxx.xxx
对端公网 IP:222.93.xxx.xxx
IPSec Policy 绑定接口:Reth11
本端内网:10.51.0.0/16
对端内网:192.168.50.0/24
*Oct 16 19:42:04:375 2026 F1070 IPFW/7/IPFW_INFO: -COntext=1;
MBUF was intercepted! Phase Num is 9(post routing beforefrag), Service ID is 28(ipsec), Bitmap is 800000000, return 1(0:continue, 1:dropped, 2:consumed, 3:enqueued, 4:relay)! Interface is Reth11,
测试访问10.51.67.254不通,debug ip info查看被IPSec模块丢弃;
*Oct 16 19:42:04:375 2026 F1070 IPFW/7/IPFW_INFO: -COntext=1;
MBUF was intercepted! Phase Num is 9(post routing beforefrag), Service ID is 28(ipsec), Bitmap is 800000000, return 1(0:continue, 1:dropped, 2:consumed, 3:enqueued, 4:relay)! Interface is Reth11,
现场测试访问10.51.69.254却是通的。
在IPSec Policy 绑定接口:Reth11下还还绑定了一条nat outbound,对应的acl涉及问题中的ip。经查阅官网资料得知,在nat和ipsec策略同时存在时,nat的优先级更高,10.51.67.0网段经nat处理转换了地址之后无法匹配ipsec策略,于是被丢包。
在原有 NAT 策略最顶端,增加PSec 感兴趣流 no-nat 豁免。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作