模块0不在位
[H3C]display power
Power 0 State: Absent
Power 1 State: Normal
模块0在位上电没打开电源开关
[H3C]display power
Power 0 State: Fault
Power 1 State: Normal
Power 2 State: Absent
Power 3 State: Absent
模块0在位正常运行
[H3C]display power
Power 0 State: Normal
Power 1 State: Normal
Power 2 State: Absent
Power 3 State: Absent
模块0在位没插电源线
[H3C-hidecmd]_display power verbose
Power Type State
0 AC/DC Error
1 AC/DC Normal
2 Internal POE Absent
3 External POE Absent
模块0在位插了电源线
[H3C-hidecmd]_display power verbose
Power Type State
0 AC/DC Normal
1 AC/DC Normal
2 Internal POE Absent
3 External POE Absent
说明:
1、电源2和电源3就是_display power ver中显示的internal poe和external poe
2、MSR50的POE电源有两个输入,一个是交流的500W,是internal poe;另一个是直流的1000W RPS电源,是external poe 。
3、电源的状态只有3种:absent(不在位),normal(在位并且已经上电),Error(在位,没有上电或者故障),其他状态区分不出来。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作