某局点S10506配置策略路由提示不支持经验案例

无。

现场一台S10506的交换机，在vlan虚接口配置策略路由提示不支持。提示如下：

[S10506-Vlan-interface100]ip policy-based-route fw 

The operation is not supported in chassis 2 slot 0. 

The operation is not supported in chassis 1 slot 1. 

The operation is not supported in chassis 1 slot 0. 

The operation is not supported in chassis 2 slot 1.

一、现场配置的策略路由如下：

policy-based-route fw permit node 1 

 if-match acl 3010 

 apply next-hop 10.10.26.2

#

acl advanced 3010

description GLQ-CS_SJ

rule 0 permit ip destination object-group GL-CS_SJ

#

object-group ip address GL-CS_SJ

1 network subnet 192.168.55.0 255.255.255.0

10 network subnet 192.168.50.0 255.255.255.0

20 network subnet 192.168.51.0 255.255.255.0

30 network subnet 192.168.52.0 255.255.255.0

40 network subnet 192.168.53.0 255.255.255.0

50 network subnet 192.168.54.0 255.255.255.0

60 network subnet 192.168.60.0 255.255.255.0

70 network subnet 192.168.61.0 255.255.255.0

80 network subnet 192.168.62.0 255.255.255.0

90 network subnet 192.168.63.0 255.255.255.0

100 network subnet 192.168.5.0 255.255.255.0

110 network host address 192.168.100.60

120 network host address 192.168.200.60

130 network subnet 192.168.30.0 255.255.255.0

140 network subnet 192.168.31.0 255.255.255.0

#

二、查看设备的acl资源，查看acl资源是充足的。

[S10506]dis qos-acl resource

Interfaces: XGE1/0/0/1 to XGE1/0/0/4 (chassis 1 slot 0)

---------------------------------------------------------------------

 Type             Total      Reserved   Configured Remaining  Usage

---------------------------------------------------------------------

 VFP ACL          2048       1024       0          1024       50%

 IFP ACL          4096       1024       0          3072       25%

 IFP Meter        2048       512        0          1536       25%

 IFP Counter      2048       512        0          1536       25%

 EFP ACL          1024       0          0          1024       0%

 EFP Meter        512        0          0          512        0%

 EFP Counter      512        0          0          512        0%

Interfaces: XGE1/1/0/1 to XGE1/1/0/48 (chassis 1 slot 1)

---------------------------------------------------------------------

 Type             Total      Reserved   Configured Remaining  Usage

---------------------------------------------------------------------

 VFP ACL          1024       512        0          512        50%

 IFP ACL          16384      4096       1          12287      25%

 IFP Meter        8192       2048       0          6144       25%

 IFP Counter      8192       2048       0          6144       25%

 EFP ACL          1024       0          0          1024       0%

 EFP Meter        512        0          0          512        0%

 EFP Counter      512        0          0          512        0%

Interfaces: XGE2/0/0/1 to XGE2/0/0/4 (chassis 2 slot 0)

---------------------------------------------------------------------

 Type             Total      Reserved   Configured Remaining  Usage

---------------------------------------------------------------------

 VFP ACL          2048       1024       0          1024       50%

 IFP ACL          4096       1024       0          3072       25%

 IFP Meter        2048       512        0          1536       25%

 IFP Counter      2048       512        0          1536       25%

 EFP ACL          1024       0          0          1024       0%

 EFP Meter        512        0          0          512        0%

 EFP Counter      512        0          0          512        0%

Interfaces: XGE2/1/0/1 to XGE2/1/0/48 (chassis 2 slot 1)

---------------------------------------------------------------------

 Type             Total      Reserved   Configured Remaining  Usage

---------------------------------------------------------------------

 VFP ACL          1024       512        0          512        50%

 IFP ACL          16384      4096       1          12287      25%

 IFP Meter        8192       2048       0          6144       25%

 IFP Counter      8192       2048       0          6144       25%

 EFP ACL          1024       0          0          1024       0%

 EFP Meter        512        0          0          512        0%

 EFP Counter      512        0          0          512        0%

三、原因分析

经过确认，现场设备不支持acl匹配地址组的部署。修改为按照正常的acl 添加多个rule 规格匹配相关流量 ，问题解决。并没有报错信息。

现场设备不支持acl匹配地址组的部署。修改为按照正常的acl 添加多个rule 规格匹配相关流量 ，问题解决。