3par存储的硬盘状态处于servicing
- 0关注
由于硬盘亮黄灯，随后检查其状态，输出信息如下
3par8000 cli% showpd -c
-------- Normal Chunklets -------- ---- Spare Chunklets ----
- Used - -------- Unused --------- - Used - ---- Unused ----
Id CagePos Type State Total OK Fail Free Uninit Unavail Fail OK Fail Free Uninit Fail
0 0:0:0 SSD normal 1787 28 0 1312 0 0 0 26 0 421 0 0
1 0:1:0 SSD normal 1787 28 0 1312 0 0 0 22 0 425 0 0
2 0:2:0 SSD normal 1787 30 0 1310 0 0 0 2 0 445 0 0
3 0:3:0 SSD normal 1787 29 0 1311 0 0 0 2 0 445 0 0
4 0:4:0 SSD normal 1787 30 0 1310 0 0 0 8 0 439 0 0
5 0:5:0 SSD normal 1787 29 0 1311 0 0 0 3 0 444 0 0
6 0:6:0 SSD normal 1787 0 0 1341 0 0 0 0 0 446 0 0
7 0:7:0 SSD normal 1787 0 0 1341 0 0 0 0 0 446 0 0
-----------------------------------------------------------------------------------------
8 total 14296 174 0 10548 0 0 0 63 0 3511 0 0
3par8000 cli% showpd -s
Id CagePos Type -State- -Detailed_State- -SedState--
0 0:0:0 SSD normal normal not_capable
1 0:1:0 SSD normal normal not_capable
2 0:2:0 SSD normal normal not_capable
3 0:3:0 SSD normal normal not_capable
4 0:4:0 SSD normal normal not_capable
5 0:5:0 SSD normal normal not_capable
6 0:6:0 SSD normal servicing not_capable
7 0:7:0 SSD normal servicing not_capable
----------------------------------------------------
8 total
可以看到 disk ID 6和7的 Detailed_State 是servicing，并且查看showpd -c 的信息，这两块硬盘的容量没有正常使用 （字体加粗部分）
由于槽位6和槽位7做过硬盘插拔操作，怀疑是有残留的硬盘信息占用槽位，随后，本人执行removespare 6:a、removespare 7:a，将旧硬盘的残留信息移除，然后执行servicemag resume 0 6、servicemag resume 0 7，命令执行后的反馈信息如下：
3par8000 cli% servicemag resume 0 6
Are you sure you want to run servicemag?
select q=quit y=yes n=no: y
servicemag resume 0 6
... mag 0 6 already onlooped
... firmware is current on pd WWN [5001173100533388] Id [ 6]
... checking for valid disks...
... disks in mag : 0 6
... normal disks: WWN [5001173100533388] Id [ 6] diskpos [0]
... not normal disks:
... verifying spare space for disks 6 and 6
... playback chunklets from pd WWN [5001173100533388] Id [ 6]
The servicemag resume operation will continue in the background.
3par8000 cli% servicemag resume 0 7
Are you sure you want to run servicemag?
select q=quit y=yes n=no: y
servicemag resume 0 7
... mag 0 7 already onlooped
... firmware is current on pd WWN [5001173100462600] Id [ 7]
... checking for valid disks...
... disks in mag : 0 7
... normal disks: WWN [5001173100462600] Id [ 7] diskpos [0]
... not normal disks:
... verifying spare space for disks 7 and 7
... playback chunklets from pd WWN [5001173100462600] Id [ 7]
The servicemag resume operation will continue in the background.
3par8000 cli% servicemag status
Cage 0, magazine 7:
The magazine is being brought online due to a servicemag resume.
The last status update was at Mon Apr 14 11:03:52 2025.
The command started at Mon Apr 14 11:00:06 2025
Chunklet relocations have completed 28 in 4 minutes and 8 seconds
servicemag resume 0 7 -- is in Progress
再次通过showpd -s查看硬盘状态，其 Detailed_State 恢复为normal：
3par8000 cli% showpd -s
Id CagePos Type -State- -Detailed_State- -SedState--
0 0:0:0 SSD normal normal not_capable
1 0:1:0 SSD normal normal not_capable
2 0:2:0 SSD normal normal not_capable
3 0:3:0 SSD normal normal not_capable
4 0:4:0 SSD normal normal not_capable
5 0:5:0 SSD normal normal not_capable
6 0:6:0 SSD normal normal not_capable
7 0:7:0 SSD normal normal not_capable
----------------------------------------------------
8 total
