H3C WA3010 忘记密码，

是wx吧

忘记密码直接console进去修改就行了，其它方法

https://www.h3c.com/cn/Service/Document_Software/Document_Center/Switches/Catalog/S5800/S5820X/Maintenance/Maintenance_Manual/H3C_DLMMHF(V1.01)/?CHID=123680

您好，请知：

可以参考如下案例：

1.1.1  不需要之前的配置文件，恢复出厂设置

以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。

System is starting...
Press Ctrl D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing.......................Done!
BootWare Validating...
Press Ctrl B to enter extended boot menu...  //如果看到该提示及时按Ctrl B进入botroom菜单

BotWare password: Not required. Please press Enter to Continue.

Password recovery capability is enabled.  //如果看到此提示，则表示设备开启了密码恢复功能。

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 6  //选择6 跳过配置文件

Flag Set Success.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 0  //选择0重启设备

System is starting...

Press ENTER to get started.

跳过启动文件后直接保存当前配置，再重启

<H3C>save

The current Configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):（输入回车）

flash:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Configuration is saved to device successfully.

<H3C>reboot

Start to check Configuration with next startup Configuration file, please wait.........DONE!

Current Configuration may be lost after the reboot, save current Configuration? [Y/N]:y

This command will reboot the device. Continue? [Y/N]:y

重启完成后使用默认配置启动，恢复出厂成功

1.2  保留原有配置，只修改密码

本手册适用于如下产品：WAC360、WAC 361、胖AP：WAP712C、WAP722E、WAP722S、WAP722、WAP621

1.2.1  以忽略系统当前配置的方式启动

以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。

详细配置过程：

System is starting...
Press Ctrl D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing.......................Done!
BootWare Validating...
Press Ctrl B to enter extended boot menu...//按Ctrl B进入botroom菜单

BotWare password: Not required. Please press Enter to Continue.

Password recovery capability is enabled. //如果看到此提示，则表示设备开启了密码恢复功能。

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 6   //选择6 跳过配置文件

Flag Set Success.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 0  //选择0重启设备

System is starting...

Press ENTER to get started.

<H3C>dir  //查看设备配置文件：startup.cfg

Directory of flash:/

   2     -rw-      1666  Apr 26 2000 12:05:39   startup.cfg

29106 KB total (16876 KB free) 

给设备和电脑配置成同网段Ip地址，举例：WAC配置成192.168.100.1/24，电脑配置成192.168.100.2/24），在电脑上使用3CDaemon软件搭建TFTP服务器，打开3CDaemon服务器，目录指向电脑E盘，然后点击应用。

<H3C>system

 [H3C]interface Vlan-interface 1

[H3C-Vlan-interface1]ip address 192.168.100.1 24

[H3C-Vlan-interface1]quit

[H3C]ping 192.168.100.2

  PING 192.168.100.2: 56  data bytes, press CTRL_C to break

    Reply from 192.168.100.2: bytes=56 Sequence=1 ttl=128 time=7 ms

 //提示设备到电脑网络可达

<H3C>tftp 192.168.100.2 put startup.cfg  

//从设备上下载startup.cfg文件到电脑E盘
  File will be transferred in binary mode
  Sending file to remote TFTP server. Please wait... |
  TFTP:     1666 bytes sent in 0 seCond(s).
  File uploaded successfully.

下载成功：

可以到本地相关路径（此例子中是E盘）查看到相关文件。

解决方法：

使用记事本打开startup.cfg文件

删除aux0口下的认证方式和密码并保存文件

覆盖当前配置文件

<H3C>tftp 192.168.100.20 get startup.cfg

The file startup.cfg exists. Overwrite it? [Y/N]:y

  Verifying server file...

  Deleting the old file, please wait...

  ...

  File will be transferred in binary mode

  Downloading file from remote TFTP server, please wait....

  TFTP:     1166 bytes received in 0 seCond(s)

  File downloaded successfully.

<H3C>reboot

Start to check Configuration with next startup Configuration file, please wait.........DONE!

Current Configuration may be lost after the reboot, save current Configuration? [Y/N]:n 不保存配置

This command will reboot the device. Continue? [Y/N]:y 确定继续重启

1.3  适用产品系列

本手册适用于如下产品：MSG360-4、MSG360-10、MSG360-10P、MSG360-20、MSG360-20N、MSG360-40、WAC380-30、WAC380-60、WAC380-90、WAC380-120、WAC381

1.4  保留原有配置，只修改密码

从设备中下载startup.cfg到电脑，具体参考：1.2保留原有配置，只修改密码

解决方法：

使用记事本打开startup.cfg文件

删除Con0口下的认证方式和密码并保存文件

覆盖当前配置文件

<H3C>tftp 192.168.100.2  get startup.cfg

The file startup.cfg exists. Overwrite it? [Y/N]:y

  Verifying server file...

  Deleting the old file, please wait...

  ...

  File will be transferred in binary mode

  Downloading file from remote TFTP server, please wait....

  TFTP:     1166 bytes received in 0 seCond(s)

  File downloaded successfully.

<H3C>reboot

Start to check Configuration with next startup Configuration file, please wait.........DONE!

Current Configuration may be lost after the reboot, save current Configuration? [Y/N]:n 不保存配置

This command will reboot the device. Continue? [Y/N]:y 确定继续重启