紫光交换机S7800XP-48X8C-G NETCONF报错

S7800XP-48X8C-G、Release 8307P10

用这个命令 ssh user@ip -s netconf -p830访问就报错 [TEST-1]%Feb 16 03:40:14:508 2011 TEST-1 SSHS/6/SSHS_AUTH_SUCCESS: SSH user adminnetconf from 192.168.100.1 port 35030 passed password authentication. %Feb 16 03:40:14:510 2011 TEST-1 SSHS/6/SSHS_LOG: Subsystem request for netconf -p830. %Feb 16 03:40:14:510 2011 TEST-1 SSHS/6/SSHS_LOG: Subsystem request for netconf -p830 failed, subsystem not found. %Feb 16 03:40:14:513 2011 TEST-1 SSHS/6/SSHS_LOG: User adminnetconf logged out from 192.168.100.1 port 35030. %Feb 16 03:40:30:715 2011 TEST-1 SSHS/6/SSHS_AUTH_SUCCESS: SSH user adminnetconf from 192.168.100.1 port 40478 passed password authentication. %Feb 16 03:40:30:717 2011 TEST-1 SSHS/6/SSHS_SRV_UNAVAILABLE: The NETCONF server is disabled or the NETCONF service type is not supported. %Feb 16 03:40:30:718 2011 TEST-1 SSHS/6/SSHS_DISCONNECT: SSH user adminnetconf (IP: 192.168.100.1) disconnected from the server. %Feb 16 03:40:44:163 2011 TEST-1 SSHS/6/SSHS_AUTH_SUCCESS: SSH user adminnetconf from 192.168.100.1 port 45990 passed password authentication. %Feb 16 03:40:44:165 2011 TEST-1 SSHS/6/SSHS_LOG: Subsystem request for netconf -P830. %Feb 16 03:40:44:165 2011 TEST-1 SSHS/6/SSHS_LOG: Subsystem request for netconf -P830 failed, subsystem not found. %Feb 16 03:40:44:166 2011 TEST-1 SSHS/6/SSHS_LOG: User adminnetconf logged out from 192.168.100.1 port 45990.

相关配置：

 ssh server enable

ssh user adminnetconf service-type all authentication-type password

local-user adminnetconf class manage

 service-type ssh

 authorization-attribute user-role network-admin

authorization-attribute user-role network-operator

line vty 0 15

 authentication-mode scheme

 user-role network-operator

 protocol inbound ssh

idle-timeout 5 0

 netconf ssh server enable

是哪里漏了配置吗。请大佬帮忙解答下，谢谢。