MSR36-20 在HCLZ中查看广域网接口serial1/0时没有显示时钟方式等信息

正常应该会显示的，你做了什么特殊的配置么。还是说有more的时候没按空格

<Sysname> display interface serial 2/1/0

Serial2/1/0

Current state: UP

Line protocol state: UP

Description: Serial2/1/0 Interface

Bandwidth: 64kbps

Maximum transmission unit: 1500

Hold timer：10 seconds, retry times: 5

Internet Address: 9.9.9.6/24 Primary

Link layer protocol: PPP

LCP: opened

Output queue - Urgent queuing: Size/Length/Discards 0/100/0

Output queue - Protocol queuing: Size/Length/Discards 0/500/0

Output queue - FIFO queuing: Size/Length/Discards 0/75/0

Last link flapping: 6 hours 39 minutes 25 seconds

Last clearing of counters: Never

Current system time:2017-12-14 10:00:37

Last time when physical state changed to up:-

Last time when physical state changed to down:2017-12-14 09:47:16

Physical layer: synchronous, Baudrate: 64000 bps

Interface: DCE

Cable type: V35

Clock mode: DCECLK1

Last 300 seconds input rate: 2.40 bytes/sec, 19 bits/sec, 0.20 packets/sec

Last 300 seconds output rate: 2.40 bytes/sec, 19 bits/sec, 0.20 packets/sec

Input:

  6668 packets, 80414 bytes

  0 broadcasts, 0 multicasts

  0 errors, 0 runts, 0 giants

  0 crc, 0 align errors, 0 overruns

  0 aborts, 0 no buffers, 1 frame errors

Output:

  6670 packets, 80446 bytes

  0 errors, 0 underruns, 0 collisions

  0 deferred

DCD: UP, DTR: UP, DSR: UP, RTS: UP, CTS: UP