求助H3C S5800交换机配置：分别划分3个vlan，vlan1（et1、et2），vlan2（et3、et4），vlan3（et5、et6）？

#创建vlan

<H3C>system-view

[H3C]vlan 2 to 3

#创建虚接口地址，vlan2和vlan3的地址分别作为PC1和PC2的网关

[H3C]interface vlan 1

[H3C-Vlan-interface1]ip address 192.168.1.254 24

[H3C]interface vlan 2

[H3C-Vlan-interface2]ip address 192.168.2.1 24

[H3C]interface vlan 3

[H3C-Vlan-interface3]ip address 192.168.3.1 24

[H3C]interface vlan 10

[H3C-Vlan-interface3]ip address dhcp

#将连接PC1和PC2接口划分到相应的vlan中

[H3C]interface GigabitEthernet 1/0/3

[H3C-GigabitEthernet1/0/3] port access vlan 2

[H3C-GigabitEthernet1/0/4]interface GigabitEthernet 1/0/4

[H3C-GigabitEthernet1/0/4] port access vlan 2

[H3C]interface GigabitEthernet 1/0/5

[H3C-GigabitEthernet1/0/5] port access vlan 3

[H3C-GigabitEthernet1/0/6]interface GigabitEthernet 1/0/6

[H3C-GigabitEthernet1/0/6] port access vlan 3

[H3C]interface GigabitEthernet 1/0/47

[H3C-GigabitEthernet 1/0/47  ] port access vlan 10

[H3C-GigabitEthernet 1/0/48  ]interface GigabitEthernet 1/0/48

[H3C-GigabitEthernet 1/0/48  ] port access vlan 10

#添加静态路由，指向路由器的网关

[H3C]ip route-static 0.0.0.0 0 192.168.1.1    //192.168.1.1只是举例，实际应该写上连路由器的互联地址

#保存配置

[H3C]save force