WA6330的两个有线口可以做动态聚合上行对接吗？

您好，请知：

WA6300支持部署链路聚合：

可以尝试将smartrate-ethernet加入聚合组看下。不过与上行设备的对接，最好物理端口的类型要一致。

以下是WA6300的链路聚合配置举例，请参考：

3.1  组网需求

如图1所示，AC与Switch通过各自的二层以太网接口GigabitEthernet1/0/1和GigabitEthernet1/0/2相互连接，具体要求如下：

·              通过以太网链路聚合增加AC与Switch间的链路带宽和可靠性。

·              AC与Switch上分别配置二层静态链路聚合组实现AC与Switch间VLAN 10和VLAN 20分别互通。

图1 二层静态以太网链路聚合组网图

3.2  配置步骤

3.2.1  配置AC

(1)      配置VLAN

# 创建VLAN 10，并将端口GigabitEthernet1/0/3加入到该VLAN中。

<AC> system-view

[AC] vlan 10

[AC-vlan10] port gigabitethernet 1/0/3

[AC-vlan10] quit

# 创建VLAN 20，并将端口GigabitEthernet1/0/4加入到该VLAN中。

[AC] vlan 20

[AC-vlan20] port gigabitethernet 1/0/4

[AC-vlan20] quit

(2)      配置二层聚合接口

# 创建二层聚合接口1，并进入二层聚合接口1视图。

[AC] interface bridge-aggregation 1

[AC-Bridge-Aggregation1] quit

# 将端口GigabitEthernet1/0/1加入到聚合组1中。

[AC] interface gigabitethernet 1/0/1

[AC-GigabitEthernet1/0/1] port link-aggregation group 1

[AC-GigabitEthernet1/0/1] quit

# 将端口GigabitEthernet1/0/2加入到聚合组1中。

[AC] interface gigabitethernet1/0/2

[AC-GigabitEthernet1/0/2] port link-aggregation group 1

[AC-GigabitEthernet1/0/2] quit

# 配置二层聚合接口1为Trunk类型，并允许VLAN 10和20的报文通过。

[AC] interface bridge-aggregation 1

[AC-Bridge-Aggregation1] port link-type trunk

[AC-Bridge-Aggregation1] port trunk permit vlan 10 20

[AC-Bridge-Aggregation1] quit

3.2.2  配置Switch

(1)      配置VLAN

# 创建VLAN 10，并将端口GigabitEthernet1/0/3加入到该VLAN中。

<Switch> system-view

[Switch] vlan 10

[Switch-vlan10] port gigabitethernet 1/0/3

[Switch-vlan10] quit

# 创建VLAN 20，并将端口GigabitEthernet1/0/4加入到该VLAN中。

[Switch] vlan 20

[Switch-vlan20] port gigabitethernet 1/0/4

[Switch-vlan20] quit

(2)      配置二层聚合接口

# 创建二层聚合接口1，并进入二层聚合接口1视图。

[Switch] interface bridge-aggregation 1

[Switch-Bridge-Aggregation1] quit

# 将端口GigabitEthernet1/0/1加入到聚合组1中。

[Switch] interface gigabitethernet 1/0/1

[Switch-GigabitEthernet1/0/1] port link-aggregation group 1

[Switch-GigabitEthernet1/0/1] quit

# 将端口GigabitEthernet1/0/2加入到聚合组1中。

[Switch] interface gigabitethernet 1/0/2

[Switch-GigabitEthernet1/0/2] port link-aggregation group 1

[Switch-GigabitEthernet1/0/2] quit

# 配置二层聚合接口1为Trunk类型，并允许VLAN 10和20的报文通过。

[Switch] interface bridge-aggregation 1

[Switch-Bridge-Aggregation1] port link-type trunk

[Switch-Bridge-Aggregation1] port trunk permit vlan 10 20

[Switch-Bridge-Aggregation1] quit

3.3  验证配置

(1)      在AC上使用命令display link-aggregation verbose查看聚合组1的详细信息。两个成员端口都处于聚合组1中且为选中状态。

<AC> display link-aggregation verbose

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected, I -- Individual

Flags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

        D -- Synchronization, E -- Collecting, F -- Distributing,

        G -- Defaulted, H -- Expired

Aggregate Interface: Bridge-Aggregation1

Aggregation Mode: Static

Loadsharing Type: Shar

  Port            Status  Priority Oper-Key

--------------------------------------------------------------------------------

  GE1/0/1         S       32768     2

  GE1/0/2         S       32768     2

(2)      在AC上使用命令display interface bridge-aggregation查看聚合组1的带宽是成员物理接口带宽之和。

<AC> display interface bridge-aggregation 1

Bridge-Aggregation1

Current state: UP

IP packet frame type: Ethernet II, hardware address: 741f-4a05-3db8

Description: Bridge-Aggregation1 Interface

Bandwidth: 2000000 kbps

2Gbps-speed mode, full-duplex mode

Link speed type is autonegotiation, link duplex type is autonegotiation

PVID: 1

Port link-type: Trunk

 VLAN Passing:   1(default vlan), 10

 VLAN permitted: 1(default vlan), 10, 20

 Trunk port encapsulation: IEEE 802.1q

Last clearing of counters: Never

 Last 300 seconds input:  2 packets/sec 308 bytes/sec 0%

 Last 300 seconds output:  0 packets/sec 0 bytes/sec 0%

 Input (total):  12659 packets, 1290752 bytes

         177 unicasts, 9919 broadcasts, 2563 multicasts, 0 pauses

 Input (normal):  12659 packets, - bytes

         177 unicasts, 9919 broadcasts, 2563 multicasts, 0 pauses

 Input:  0 input errors, 0 runts, 0 giants, - throttles

         0 CRC, - frame, 0 overruns, 0 aborts

         - ignored, - parity errors

 Output (total): 316 packets, 295765 bytes

         307 unicasts, 9 broadcasts, 0 multicasts, 0 pauses

 Output (normal): 316 packets, - bytes

         307 unicasts, 9 broadcasts, 0 multicasts, 0 pauses

 Output: 0 output errors, 0 underruns, - buffer failures

         0 aborts, 0 deferred, 0 collisions, 0 late collisions

         - lost carrier, - no carrier

3.4  配置文件

·              AC：

#

vlan 10

#

vlan20

#

interface Bridge-Aggregation1

port link-type trunk

port trunk permit vlan 1 10 20

#

interface GigabitEthernet1/0/1

port link-type trunk

port trunk permit vlan 1 10 20

port link-aggregation group 1

#

interface GigabitEthernet1/0/2

port link-type trunk

port trunk permit vlan 1 10 20

port link-aggregation group 1

#

·              Switch：

#

vlan 10

#

vlan 20

#

interface Bridge-Aggregation1

port link-type trunk

port trunk permit vlan 1 10 20

#

interface GigabitEthernet1/0/1

port link-type trunk

port trunk permit vlan 1 10 20

port link-aggregation group 1

#

interface GigabitEthernet1/0/2

port link-type trunk

port trunk permit vlan 1 10 20

port link-aggregation group 1

以下是用户手册连接，请参考：

https://www.h3c.com/cn/Service/Document_Software/Document_Center/Wlan/WA/WA6300/