WA2620i-AGN

Ap无法注册成功，而且反复重启，查看重启过程，一直卡在获取地址阶段;

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare....

The Extend BootWare is self-decompressing.........................Done!

****************************************************************************

*                                                                          *

*                 H3C WA2620i-AGN BootWare, Version 3.03                   *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Sep  1 2014

CPU Type            : AR9350

CPU L1 Cache        : 32KB

CPU Clock Speed     : 560MHz

Memory Type         : SDRAM

Memory Size         : 128MB

Memory Speed        : 480MHz

BootWare Size       : 512KB

Flash Size          : 32MB

CPLD Version        : 004

PCB Version         : Ver.E

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--flash:/wa2600a_fit.bin!

The main application file does not exist--flash:/wa2600a_fit.bin!

Starting to get the backup application file--flash:/wa2600a_fat.bin!

The backup application file does not exist--flash:/wa2600a_fat.bin!

Starting to get the secure application file--flash:/wa2600a_fit.bin!

The secure application file does not exist--flash:/wa2600a_fit.bin!

Booting App fails!

Trying to get the IP address from the DHCP server......

Getting IP Address Failed, the system will reboot.

 [State : Idle] Reset request, rebooting the AP

Rebooting......

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare....

The Extend BootWare is self-decompressing.........................Done!

上联的路由器做DHCP server，检查了配置没有发现问题：且连接上AP的接口始终在up，down切换，换了其他接口后还是这样：

上联路由器配置（AP直连路由器）：

[H3C] dis cu

#

version 7.1.059, Release 0304P15

#

sysname H3C

#

password-recovery enable

#

vlan 1

#

vlan 257

#

dhcp server ip-pool apmanage

gateway-list 10.0.35.254

network 10.0.32.0 mask 255.255.252.0

expired day 0 hour 0 minute 30

option 43 hex 8007000001b6307505

#

controller Cellular0/0

#

controller Cellular0/1

#

interface Aux0

#

interface NULL0

#

interface Vlan-interface257

ip address 10.0.35.254 255.255.252.0

#

interface GigabitEthernet0/0

port link-mode route

combo enable copper

ip address dhcp-alloc

#

interface GigabitEthernet0/2

port link-mode route

#

interface GigabitEthernet0/1               //接AP的接口

port link-mode bridge

port access vlan 257               //网关vlan

#

scheduler logfile size 16

#

line class aux

user-role network-admin

#

line class tty

user-role network-operator

#

line class vty

user-role network-operator

#

line aux 0

user-role network-admin

#

line vty 0 63

user-role network-operator

#

domain system

#

domain default enable system

#

role name level-0

description Predefined level-0 role

#

role name level-1

description Predefined level-1 role

#

role name level-2

description Predefined level-2 role

# 

role name level-3

description Predefined level-3 role

#

role name level-4

description Predefined level-4 role

#

role name level-5

description Predefined level-5 role

#

role name level-6

description Predefined level-6 role

#

role name level-7

description Predefined level-7 role

#

role name level-8

description Predefined level-8 role

#

role name level-9

description Predefined level-9 role

#

role name level-10

description Predefined level-10 role

#

role name level-11

description Predefined level-11 role

#

role name level-12

description Predefined level-12 role

#

role name level-13

description Predefined level-13 role

#

role name level-14

description Predefined level-14 role

#

user-group system

#

return

[H3C]       

debug dhcp server无输出，但是接AP的接口会频繁UP，down，换接口依旧：

启动过程没有debug信息输出

<H3C>debugging dhcp server all 

<H3C>t m

The current terminal is enabled to display logs.

<H3C>t d

The current terminal is enabled to display debugging logs.

<H3C>%Apr 16 15:25:53:148 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet0/1 changed to down.

%Apr 16 15:25:53:149 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet0/1 changed to down.

%Apr 16 15:25:53:151 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface257 changed to down.

%Apr 16 15:25:53:151 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface257 changed to down.

<H3C>

<H3C>%Apr 16 15:26:20:148 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet0/1 changed to up.

%Apr 16 15:26:20:149 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet0/1 changed to up.

%Apr 16 15:26:20:153 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface257 changed to up.

%Apr 16 15:26:20:153 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface257 changed to up.

%Apr 16 15:26:24:148 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet0/1 changed to down.

%Apr 16 15:26:24:149 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet0/1 changed to down.

%Apr 16 15:26:24:151 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface257 changed to down.

%Apr 16 15:26:24:151 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface257 changed to down.

%Apr 16 15:26:31:148 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet0/1 changed to up.

%Apr 16 15:26:31:149 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet0/1 changed to up.

%Apr 16 15:26:31:153 2018 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan-interface257 changed to up.

%Apr 16 15:26:31:153 2018 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface257 changed to up.

<H3C>

ap（WA2620I-acn）----路由器（dhcp server）