不涉及
客户反馈设备掉电之后配置丢失,导致AP掉线,现场工程师手动恢复配置后通过save保存命令时候提示报错。
<H3C>save ---------------------交换板模式下
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/config.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file.
Please wait...
Not enough disk space to save the configuration file!
Failed to save the current configuration.
Not enough disk space to save the configuration file!
表示没有足够的存储空间去保存配置文件,通过dir查看flash也提示下面的报错,设备没有格式化。
<H3C>dir
% Unformatted device
指导现场按照下面步骤操作问题解决。
1.先备份交换板的配置,可以通过记录会话保存下来
2.<H3C>fixdisk flash:用命令恢复存储空间,然后重新再测试,看是否能dir看到flash,保存配置是否正常
3.格式化交换板fomat flash ,重启sw板
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作