Aolynk DR814 add reserved mapping for ip camera
1. Customer requirements
DR814 as the NAT gateway between the customer’s intranet and the internet, the customer wants to control the camera connected the DR814 through the internet.
2. Topology
3.Step by step configuration guide
Step1 Find the security interface configuration page as below and Make sure NAT is enalbed.
Step2 Then click Advanced NAT configuration…to enter the page as below
Step3 Click Add Reserved Mapping…to enter the page as below and fill in with camera address, Transport type and the port 80
Step4 Click <Add Reserved Mapping>…to enter the page as below .
Step5 Add another mapping filled with camera address, Transport type and the port 4321
Step6 Click <Add Reserved Mapping> after the configuration is complete.
Step7 Do remember to return to main interface to save the configuration.
4.Note
IN step 1, the default LAN port of DR814 had modified to 192.168.0.1, you should use 192.168.0.1 to enter the configuration page. And the camera address is 192.168.0.10, in other words, the default LAN port and the camera address you had set should in same net segment.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作