某局点WA2600i-AGN与AC建立CAPWAP隧道后不断重启

客户现场包含AC设备WX2540H以及WA2620i-AGN。

将wa2600a.ipe上传至apimge目录下后连入AP。

随后观察到，AP与AC的CAPWAP隧道建立并正常下载加载版本文件。

最后AP不断重启，其中版本文件从AC软件包中提取，AP在连入前已加载同样的版本文件。

循环重启过程如下：

<WA2620i-AGN>Decompressing file wa2600a-boot.bin to flash:/wa2600a-boot.bin.......... 

<WA2620i-AGN>..........Done.

Decompressing file wa2600a-system.bin to flash:/wa2600a-system.bin................................................................... 

<WA2620i-AGN>..Done. 

<WA2620i-AGN>%Mar 9 00:03:09:050 2012 WA2620i-AGN CWC/6/CWC_IMG_DOWNLOAD_COMPLETE: Downloading the image file wa2600a.ipe from AC 10.102.131.200 through the CAPWAP tunnel is complete. %Mar 9 00:03:09:050 2012 WA2620i-AGN CWC/6/CWC_AP_REBOOT: AP in state Image Data is rebooting. Reason: Image was downloaded successfully.

<WA2620i-AGN>%Mar 9 00:03:09:738 2012 WA2620i-AGN APMGR/6/APMGR_LOG_REBOOTCAUSE: Set Wlan Reboot Cause, SubSlot = 65535, DevRebootCause = 8, WlanRebootCause = 1, ulRet = 0.

<WA2620i-AGN>%Mar 9 00:03:16:567 2012 WA2620i-AGN DEV/5/SYSTEM_REBOOT: System is rebooting now.

<WA2620i-AGN> System is starting... 

Press Ctrl+D to access BASIC-BOOTWARE MENU 

Booting Normal Extend BootWare.... 

The Extend BootWare is self-decompressing................................ 

Done! 

AC版本为version 7.1.064, Release 5435P02 ， 型号为WX2540H；AP型号为WA2620i-AGN

该重启问题是否和版本有关？