H3C防火墙H3C SecPath F1000-S是否支持透明部署模式
- 0关注
- 1收藏，1506浏览
问题描述：
[H3C]display version
H3C Comware Software Comware software, Version 3.40, Release 1623
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
All rights reserved.
Without the owner's prior written consent, no decompiling nor reverse-engineering shall be allowed.
H3C SecPath F1000-S uptime is 0 week, 0 day, 0 hour, 41 minutes
该设备是否支持web登录以及透明模式部署
组网及组网描述：
桥接进主干网络
- 2021-04-14提问
- 举报
-
(0)
最佳答案
您好，请知：
H3C防火墙H3C SecPath F1000-S支持透明部署模式
以下是部署要点，请参考：
1、防火墙上创建VLAN，并将VLAN以trunk的方式在端口进行配置，并trunk相应的VLAN通过。
2、防火墙上涉及到的物理端口和vlan需加入安全域并放通安全策略或域间策略。
3、防火墙的物理端口默认在路由模式，需要切换为bridge才能进行trunk配置，以下是参考命令：
int gi 1/0/1
port link-mode bridge
quit
- 2021-04-14回答
- 评论(1)
- 举报
-
(0)
没有这样的命令 [H3C-GigabitEthernet0/1]po [H3C-GigabitEthernet0/1]po [H3C-GigabitEthernet0/1]br [H3C-GigabitEthernet0/1]bridge ? vlanid-transparent-transmit Config vlanid transparent transmit [H3C-GigabitEthernet0/1]bridge-s [H3C-GigabitEthernet0/1]bridge-set ? INTEGER<1-255> Bridge set number for bridging fast-forwarding Enable fast-forwarding for the interface [H3C-GigabitEthernet0/1]bridge-set 1 [H3C-GigabitEthernet0/1]di sthis ^ % Unrecognized command found at '^' position. [H3C-GigabitEthernet0/1]br [H3C-GigabitEthernet0/1]bridge-s [H3C-GigabitEthernet0/1]bridge-set f [H3C-GigabitEthernet0/1]bridge-set fast-forwarding ? inbound Enable fast input on the interface outbound Enable fast output on the interface <cr> [H3C-GigabitEthernet0/1]bridge-set fast-forwarding in [H3C-GigabitEthernet0/1]bridge-set fast-forwarding inbound [H3C-GigabitEthernet0/1]interface GigabitEthernet 0/0 [H3C-GigabitEthernet0/0]interface GigabitEthernet 0/1 [H3C-GigabitEthernet0/1]undo bridge-set fast-forwarding inbound [H3C-GigabitEthernet0/1] [H3C-GigabitEthernet0/1] [H3C-GigabitEthernet0/1]interface GigabitEthernet 0/0 [H3C-GigabitEthernet0/0]bridge-set 1 [H3C-GigabitEthernet0/0]dis this # interface GigabitEthernet0/0 bridge-set 1 只可以这样
可以的，透明方式跟深信服有所不同，基于vlan来做的
- 2021-04-14回答
- 评论(1)
- 举报
-
(0)
[H3C]vlan 100 ^ % Unrecognized command found at '^' position. 没有这个命令
[H3C]vlan 100 ^ % Unrecognized command found at '^' position. 没有这个命令
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
没有这样的命令 [H3C-GigabitEthernet0/1]po [H3C-GigabitEthernet0/1]po [H3C-GigabitEthernet0/1]br [H3C-GigabitEthernet0/1]bridge ? vlanid-transparent-transmit Config vlanid transparent transmit [H3C-GigabitEthernet0/1]bridge-s [H3C-GigabitEthernet0/1]bridge-set ? INTEGER<1-255> Bridge set number for bridging fast-forwarding Enable fast-forwarding for the interface [H3C-GigabitEthernet0/1]bridge-set 1 [H3C-GigabitEthernet0/1]di sthis ^ % Unrecognized command found at '^' position. [H3C-GigabitEthernet0/1]br [H3C-GigabitEthernet0/1]bridge-s [H3C-GigabitEthernet0/1]bridge-set f [H3C-GigabitEthernet0/1]bridge-set fast-forwarding ? inbound Enable fast input on the interface outbound Enable fast output on the interface <cr> [H3C-GigabitEthernet0/1]bridge-set fast-forwarding in [H3C-GigabitEthernet0/1]bridge-set fast-forwarding inbound [H3C-GigabitEthernet0/1]interface GigabitEthernet 0/0 [H3C-GigabitEthernet0/0]interface GigabitEthernet 0/1 [H3C-GigabitEthernet0/1]undo bridge-set fast-forwarding inbound [H3C-GigabitEthernet0/1] [H3C-GigabitEthernet0/1] [H3C-GigabitEthernet0/1]interface GigabitEthernet 0/0 [H3C-GigabitEthernet0/0]bridge-set 1 [H3C-GigabitEthernet0/0]dis this # interface GigabitEthernet0/0 bridge-set 1 只可以这样